Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,This is fancy NAT question for yal and most people don't have to do this, but my network is very restrictive! Internet works fine for all devices and I have PAT on my firewall already.I want to do this before it hits my firewall, which is on ...
Hi All, this is a new setup. I have 5520 WLC (Image 8.3.141, 10.10.7.15) & 1832i APs. I can't seem to get the AP to join the WLC. Below is what I get on the AP console. What am I missing? I am thinking I don't have the DHCP Option setup correc...
Hi All,
This is what is configured on all the routers and switches.
aaa new-model
aaa authentication login default group radius localaaa authentication enable default noneaaa authorization console "There is no authorization on the con...
Hi, I have 2 6506 Core Switches running HSRP (no VSS) and Nexus 5596-UP connected to it at L2. Just like this setup I followed and it works.https://community.cisco.com/t5/switching/vpc-on-nexus-5000-with-catalyst-6500-no-vss/td-p/1618853
Now we wan...
Hello All,I have 3750X stacked with 2 switches.I am trying to span more than 1 destination, so I have the below configuration, but I don't see span traffic going to Gi1/0/22-24 (my server nic showing 0 receive). Only span that is working is the firs...
My devices can access internet and works and is being PAT at the firewall, my firewall blocks all public DNS, the company does not allow public DNS. So I want to NAT this destination public DNS-8.8.8.8 to my private DNS-10.10.10.1 before it hits the ...
2018SEP18 - I implemented this over the weekend and it works with the below tweaks!
Moving vlan 701 and 704 off the Core to the Nexus 5596 to elevate 1G vlan on core to nexus 10G vlans.Nexus - using L3, OSPF & PBRI left the trunk ports from core ...
