Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have a client with a BE6K on a C220 server platform and one of the hard drives have failed. The system is not under a support contract so cannot log a case with TAC.
I would just like to know if the customer can purchase any Hard drive to r...
Hi,
I just upgraded my CUCM/IMP/CUC from 10.5 to 11.5(1)SU3. VCS expressway is and was running v8.10.1 and MRA was working fine when we were on CUCM 10.5.
After CUCM/IMP upgrade Jabber MRA connections were still working but seems to have stopped ...
Hi,
I have a client with a BE6000 deployment and the following was ordered as part of their initial implementation a few years back. They have never implemented it as they had some pre-requsites they needed to resolve first. They are now looking to i...
Hi, I have a Lab setup with ISE 1.3, WLC 5508 7.6.130.0. I have setup the ISE using Setup Assistant as a base point and have managed to get a couple of things working, such as the Guest Portal with Self Registration, standard Wireless dot1x authentic...
Hi I have a remote site with two 800 series routers configured with HSRP on WAN and LAN (VLAN interfaces, 2 to be exact). I have a site-to-site VPN terminating at our HO on an ASA 5500 series. I have configured the routers as per "Cisco High Availabi...
Managed to resolve the issue, one of the client's configured DNS servers were problematic. strange thing though cause it intermittently resolved DNS queries.
removed this DNS server from the EXP-C server and worked immediately. added it back and pr...
Hi Patrick,
Thanks for the response. I tried to create the $0 order for Expressway-C/E previously, as per the info in the following link, https://ciscocollab.wordpress.com/2014/02/20/how-to-get-expressway-c-and-e-licenses. I can only add the top lev...
Hi Mohanak,thank you you for the response.i have checked the compatibility for ise1.3 and saw what you posted but Are you saying IOS 8.1 is not supported?if so, why can I register certain 8.1 devices.also I did some further testing since my last post...
