Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All, We have replaced a line card in our 7k with a new line card. The old card seemed to have a rebooting issue as well. After speaking with TAC they sent us a new one. Now this new line card is rebooting ever 15 to 20 minutes.I do not see anything i...
We have alot of logs going through our Nexus 7000 that is referencing the above and below error "%ARP-4-INVAL_IP".2013 Mar 5 08:56:26.207 ASC7010-prod %ARP-4-INVAL_IP: arp [5426] Received packet with invalid destination IP address (xx.xx.xx.xx) fr...
I seem to be having an issue getting a 3xT1 bonded solution to work. I can get 2 out of the 3 T1s to come up and pass traffic, but I can not get the third one to be added to the solution.Hardware: 2851IOS: c2800nm-advipservicesk9-mz.124-15.T8.binModu...
We have a stack of switches that is at the max number of members allowed in the stack. Problem is we are running out of port density and need to add more ports. So instead of adding a whole new stack I would rather replace 2 of the 24-port swicthes w...
I am trying to figure out why the Device view has no systlogs in Cisco Prime 4.1I have everything configured, the switch is sending debugging level logs to the IP of the Prime Server. I am fairly certain it is reporting because it has alot of other i...
After contacting TAC we did just that. We moved the card into Slot #4. After we did this we started to get a log entry about EOBC (heart beat). This was the heart beat from the module to the SUP. So this would not reach the Sup and it would consider ...
