Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just a quick question. When configuring ports facing the WLC, the port facing the WLC management should be switch access vlan management with trunks for the SSIDs, correct?Ports facing APs should be native management vlan and allowed ssid vlans, corr...
show hw-moduleshow controllers dwdmThese seem to only allow viewing light levels on ten gig interfaces. I do have compatible DOM enabled SFP in place as well.
I have followed the details here as closely as I can:http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtmlI've upgraded to 7.4. I've enabled IGMP snooping, increased the time out, decreased the query/hello i...
Had various issues with WLC recently. Still not sure if it's WLC or LAP that's causing issue.Here are the logs:5Thu Mar 29 16:20:10 2012AP Disassociated. Base Radio MAC:c4:71:fe:42:15:ac6Thu Mar 29 16:20:10 2012AP's Interface:1(unknown type) Operati...
3750 can not support multiple subnets in it's DHCP server pool config.Is this an issue that can be fixed with a different iOS or is there a different Cisco switch that I can replace the 3750 with that will handle multiple subnets within an individual...
I thought that may be the problem but the people at Bonjour told me their multicast address range was specifically 224.0.0.251.I have enabled multicast with "ip multicast-routing". This is a large trunked network with only the edge device providing ...
Is the AP currently connected to controller................ NoTime at which the AP joined this controller last time...... Apr 02 12:34:01.451Type of error that occurred last........................... AP got or has been disconnectedReason for error t...
http://www.cisco.com/cisco/software/release.html?mdfid=280954465&release=7.0.230.0&relind=AVAILABLE&flowid=7009&softwareid=280926587&rellifecycle=ED&reltype=latestDo I need to download and install both or just the main OS?