04-02-2014 07:29 AM - edited 07-05-2021 12:36 AM
When I am setting up the 3355 MSE I have a question about the second ethernet interface. I am not using HA. Can I assign the same IP address to the second port as I do to the first port or does it have to have a seperate address? I noticed in the Prime that when you add the MSE it only asks for one IP address.
Solved! Go to Solution.
04-02-2014 04:50 PM
No, you cannot assign same IP address for the 2nd interface & connect to your network.
Use a single port configured in your case.
HTH
Rasika
*** Pls rate all useful responses ****
04-02-2014 04:50 PM
No, you cannot assign same IP address for the 2nd interface & connect to your network.
Use a single port configured in your case.
HTH
Rasika
*** Pls rate all useful responses ****
04-02-2014 06:33 PM
Thank you for the answer. What would I use the second port for if it is not used for HA?
Seth
04-02-2014 09:25 PM
2nd interface config is optional, you do not want to configure it in normal scenario. Refer below
http://www.cisco.com/c/en/us/td/docs/wireless/mse/3355/user/guide/mse3355_qsg/mse_qsgmain.html
HTH
Rasika
08-12-2014 12:57 PM
So I have a question regarding the port configurtion.
In the autoconfiguration script there is an e0 and e1. However, on the back of the physical box there is a IMM, e1 & e2. I have configured e0 only via the script. But when I ping the default gateway it is reaching out with 1.1.1.10. Even though I have configured it with the correct IP.
I tried to move the cable to the IMM port with no success. I tried E2 with same results.
The startup config is minimal in terms of explaining what each does.
Any idea what physical port e1/2 maps to e0/e1 in the startup configuration and what should be configured and where the cable should be plugged in? No HA setup here. Just a straight IP connection into our network for communication with NCS Prime..
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide