Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anybody know if the 7940/7960 supports IGMP? I have trawled through Cisco docs and cant find a mention. I've also contacted the Cisco knowledgebase and they don't know either?Many thanks.
Does anybody know where I can find out the performance of a 2621XM (running IPSEC 3DES) when running AES. This is for a barebones box only (I.e. no AIM module). I have found the performance of all the AIM modules, but not for the software-only impl...
Scenario: 6500 switch capturing a VLAN onto a FE port on the switch. This VLAN has user traffic and backup traffic running within it. We want to prevent the backup traffic (approx 8 IP addresses) being captured. Can VACLs do this? The issue I se...
This is what I want to do.Upgrade Cisco Secure ACS 2.6.4.4 on WinNT to Version 3.3 on Win2K3. I am not interested in replicating my database, I will do a new install and re-build the database.. Now, I see you can buy an upgrade licence CSACS-3.3-W...
I agree with Steve. I went to a routing and switching update hosted by Cisco, and in my notes it shows it that the GLC-GE-100FX will be supported on the 3750. Our pricelist also backs this up, the GLC-GE-100FX is under the 3750 section (amongst ot...
Thats pretty much what I thought. I think it is supported, but like you say, the router performance is going to get a hammering.I've put the request to our Cisco SE, if I get a response I'll post it here.Many thanks,Richard
Choywy is right. Some companies are a bit cheeky when they tout their routers as adsl routers but they don't actually have an adsl modem built in. If you can take it back, change it for one with an integrated modem.
Visit this link.http://www.cisco.com/en/US/products/hw/switches/ps5213/products_qanda_item09186a00801973dd.shtmlThere is a table showing available patch leads if you scroll down. (Maybe go elsewhere though, Cisco are expensive for patch leads).
Did you erase the original image file first. If you didn't, this will be why it is not letting you copy the image across, there probably isn't enough space for both the old and the new. Search Cisco.com for the upgrade instructions for this switch ...
