Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 2911 that I am setting up as a Terminal server to connect to other Cisco devices out of band. I have the line interface plugged into WIC slot 3 which give me lines 35-50. I have configured the line as 2035-2042 since I only have 1 octal ca...
We had a non Cisco switch running our IP phones. The phones are polycoms phones. That switch has died and we are replacing it with a cisco switch. How would I setup a voice vlan. So if a phone is plugged into the switch port it will pickup one vl...
I have a 2911with an amphenol handoff to the customer. The customer has three lines and want the three lines to ring at the same time. I know I can do a hunt group and add the preference tag to it. But this will ring them one at a time. I am look...
We have a user that is able to log into his jabber account, but the "use my computer for calls" is greyed out. The user can not uncheck this option. I have checked their profile and it appears to be the same as everyone elses nothing stands out. An...
I have a Mac running Catalina and I am using jabber 12.8.0. I am able to sign in with the same credentials on a PC. Any suggestions. On the CUCM it should be the same profile for both.
That worked perfectly. I have one final question, I have a MOD banner when I login to the router. When I did the telnet session, I also get the banner. Is there a way to not get it when I connect to the console ports? If not not a big deal I can ...
My voice vlan is 10 and my data is 40. I have dropped the following config and both the pc and the phone are getting IP's from vlan 40. Is there a global config or something else I need to do? interface GigabitEthernet0/7
description Polycom Spare ...
