Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everybody!We would like to explore and option to have a separate DNAC environment just for provisioning. The idea is for this to be isolated and only able to run our onboarding scripts.We don’t need any other DNAC features (Assurance, Analytics, e...
Hi everybodyWe are segmenting our networks based on Cat9500 & Cat9600 as the L3 core. We only want management flows to be served by the management VRF and its associated L3 interfaces.The question is about how to do this for HTTPS access.For the SSH ...
I have a basic question about ISE sizing. We bought it and plan to use it only for Tacacs authentication (no NAC). We will have around 150 switches requiring authentication.Do you think we can do this with the “small” OVA (Virtual SNS-3515 OVA - ISE-...
Hi everybody!
Hope any of you had the same problem.
We are using the tunnel feature in NX-OS. When the packets are bigger than the tunnel MTU and fragmentation is needed, the IP fragments created by the switch have different ID at an IP level and can...
Hi Forum
I know it is possible to configure Speed Dials from the CUCM URL. We don't want to give users access to this.
We would really like them to configure their own Speed Dials from their phones.
I can see this is possible in the BE4000 (8800 phon...
I recommend you split into a Cat9500 with fast interfaces and a Cat9300 aggregating the slow ones.You can also explore using the new Cat9300X family. For example the C9300X-24HX.
I had this problem too. I did not have default AAA authentication and authorization groups.I added these: aaa authentication login default group ISE_GROUP localaaa authorization exec default group ISE_GROUP local
We had the same problem and this was caused by using the wrong screws that were included in the Cisco mounting kit. The silver screws are a few millimeters longer and damaged the motherboard. The black ones should be used instead.This is a mechanical...
I was also getting error 516.I was using anonymous FTP. The issue was the '@' included in the password. Once I changed to a simpler password not representing an email address, it worked.
