About support systemsGo

support systemsGo · 04-25-2017

Hello. We have an interesting issue on setting up NAT on GRE tunnels. In the setup, there are 3 routers in three different sites. Router in Site A, Site B, and Site C.We do not have access to any of the equipment in Site C. (ie. The configuration ca...

support systemsGo · 01-28-2015

Hello.We are experiencing drops in audio during calls. We have a CME router connected to one switch in one location, and the phones connected to another switch in another location.The two switches are connected via 100Mbps Metroethernet line (configu...

support systemsGo · 12-25-2014

I am trying to put a similar line on all phones using CME. (On about 50 phones)All phones will have the same line 2 button. However, if I try to call it, it just rings a random phone, not all the phones at the same time.The strange thing is, that whe...

support systemsGo · 11-18-2014

Hello. Does the HWIC-4B-S/T support voice for BRI lines?Was able to get a HWIC-2CE1T1-PRI to work before by using the commands: controller T1 0/0/0pri-group timeslots 1-24 voice-dsp But it doesn't look like this will work for this card, as I cannot...

support systemsGo · 11-16-2014

Hello, I have 2 questions about the Anyconnect mobile license? 1. Why is it that we need a separate mobile license for mobile devices for SSL VPN on an ASA firewall in addition to the regular essentials license, but when using the SSL VPN on newer IO...

support systemsGo · 11-30-2019

Having the same issue as #2."entries for blocked/invalid ARP requests for IPs and MAC that were in the snooping binding database" Did you ever get this resolved? What was the fix? Thanks

support systemsGo · 04-26-2017

All network blocks are reachable, (Cannot test from site C though) and I tried removing and adding the NAT back, but still not seeing the translation happen as it should be. Tried ping from the source and also from PC in 192.168.2.45, but it is still...

support systemsGo · 04-26-2017

They are there to limit the routes being advertised to site C. (Was not configured by us.) Site B receives the route for 192.168.2.0/24 from site A via EIGRP. It does not receive a route for that subnet from site C. Also, when we do an debug ip nat...

support systemsGo · 04-26-2017

Site A router does not have a tunnel to site C. We tried it without doing the route-map and it also gives the same result (although now the translations stay longer) And you are right. It is actually, Pro Inside global Inside local Out...

support systemsGo · 02-04-2015

Using 3750 switches. network-clock-participate wic 0 is in the config already. Could it be due to the cable length? The port on the wic card is connected to the PRI provider handoff by a 3meter RJ45, but config shows "Cablelength is long 0db".

Member Since	‎11-03-2012 12:32 AM
Date Last Visited	‎02-09-2021 06:36 AM
Posts	49
Total Helpful Votes Received	1

User Statistics

User Activity

GRE Tunnel NAT Issue

Possible QoS Issue

CME Shared Line problem

HWIC-4B-S/T - Does it support voice?

Anyconnect Mobile License

Re: DAI on 3750x and 3850s

All network blocks are

They are there to limit the

Site A router does not have a

Using 3750 switches. network