Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I am looking to build a Outdoor wireless mesh with approx 250-5000 AP's on completion. This mesh will also have the requirement for supporting ethernet bridging. I have read every guide and can find nothing related to how the mesh APs show b...
Hello, We have a new MX700 telepresence system. When I set the system name under Configuration>System Configuration>System Unit and hit the save button the name will update as expect on the touch pad. If I reboot the system that setting is lost with...
Hello, I have an issue with redistributing eigrp into bgp. I have a router dual connected to other routers, lets call it a routerleaker. Its sole purpose is to leak routes between vrf's. It is is peered eigrp with the vrf routers and has an instance ...
Hello, I have an issue with redistributing eigrp into bgp. I have a router dual connected to other routers, lets call it a routerleaker. Its sole purpose is to leak routes between vrf's. It is is peered eigrp with the vrf routers and has an instance ...
Hello, I am very new to voip, second day. I have configured a 3850 stack to trust cisco phones on the switchports with the auto qos feature. I am interested to know where else I have to apply qos for the policy's to apply. The 3850 stack is uplinked...
As a workaround to the device not saving these settings threw a reboot, I was able to use a start-up script to reset them every time the device launches. Configuration>Start-up Scripts xConfiguration NetworkServices SSH Mode: OnxConfiguration Network...
Thank you for the response. The first issue I had was actually a code problem. I downgraded the code and the problem of having the two links up and the route changing to a directly connected went away. Then I wan into exactly what you are explaining ...
This behavior is because without statically mapping the mac address or using sticky the switch doesn't know to block pc-b. The maximum 2 command is telling it that no more than two mac address can be learned on this port but as soon as you unplug pc-...
