Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
065570: Feb 28 13:52:13.743: TFTP: Looking for spa525g-7-5-4.BIN065571: Feb 28 13:52:13.743: TFTP: Opened flash:/phones/525/spa525g-7-5-4.bin, fd 15, size 11097600 for process 176065572: Feb 28 13:52:21.911: TFTP: Looking for RingList.xml065573: Feb ...
Hello I am trying to guarantee 100mbps for a vlan across a gig link. I have done some research and found this command for switchesmls qos srr-queue input priority-queue 2 bandwidth 20However it doesn't seem to work for my 6500. I know the 6500 uses...
I am trying to put QOS on my 6500 trunk port using MQC however I keep getting an error. Basically I want to match a VLAN and allocate a minumum 100Mbps on that interface, with the ability to use the entire gigabit link if no other traffic is travers...
I am trying to set up QoS specifically CBWFQ. My question is "is it correct if the traffic doesn't match any Queues traffic will be placed in Class-default?"I guess this is like the permit ip any any at the end of an access-list. I don't want the t...
When I try to enable my UC540 alternate greeting prompt it plays but then the regular prompt plays directly after it. I am using script v04.aef, when using v03.aef it doesn't even come on when enabled. Any suggestions?
Yes but how would you rate limit the vlan to 900mbps or guarantee 10% of the bandwidth? I specifically do not know the commands because the mls qos srr-..... doesn't work on the 6500. Can you give me an example?
I was able to authenticate with the following commands, I'm just wondering why the above didn't work.tacacs-server host 10.1.10.99tacacs-server directed-requesttacacs-server key 7 047919271E205D1A01
So with the group policies if one of my customers gets ahold of a pcf file they won't be able to authenticate? Wouldn't they just authenticate under a different group?
Thank you so much Sean. I just looked up those command they seem like they will work. Can you tell me where I can view this on the ACS server? I am running ACS version 5.2
