Hi all,
Question regarding remote anchor WLC redundancy functionality. Topology: 2 locations, each with anchor WLC. Location 1 is primary anchor (priority 1), Location 2 is secondary anchor (priority 2). How would (if at all) fail over work, if ...
Hi,I have a MPLS connected router, using BGP to learn about other MPLS sites. This BGP information is redistributed into an OSPF instance between that router and an ASA. The problem I'm having is that a network route is not in the ASA is NOT correc...
Hi,Can anyone answer the following?Is it possible to auto run a URL to an internal Web interface, right after a user logins into SSLVPN?Instead of the user having to find and click the bookmark, can we make it auto run, somehow?Thanks,E
Hi,Here is the situation encountered.1552E Rap will "lock" up, and not allow MAPs to connect through it to join. the WLC. Rebooting the Rap will resolve the issue, but the problem comes back and some random point in the future. Prior to rebooting t...
Hi,Does anyone know if you can some how export Air Quality reports from a 5508? I'm pretty sure I have read that we can not look back in time at the Air Quality report from the WLC, but can from NCS. If NCS was in the picture, can the Air Qaulity R...
I too, am in the same boat, but this is a fresh 2.4 install, and we are at the latest patch.
ISE is finding the username multiple times, but TACACS auth fails even though one of the user/pass was successful.
I had to resort to appending the FQDN ...
Hi macovey,
Did your AP complain of DNS/SNTP issues without a switch in the picture? It seems like our 2802 AP/ME won't "stabilize" until "something" is plugged into the data port of our power injector.
What if you are using PSK for the SSID on the foreign/anchor? Would MAC Filtering need to be checked on the WLAN of the foreign WLC? Would I need to configure the RADIUS auth server on the foreign as well? Or just the anchor?