Hi Tucker,  You can draw on the whiteboard right in the Cisco Spark app. After you create a whiteboard, you can edit it and share it, but you can't delete them. https://help.webex.com/docs/DOC-15333 Thanks Rishi

FYI, just in case it helps others. 11:29:12.885 ||PretransformCallingPartyNumber=7033 |CallingPartyNumber=7033 |DialingPartition=GVC_Phones_PT |DialingPattern=102 |FullyQualifiedCalledPartyNumber=102 >> changed the partition on the directed call p...

on an ATA187 combination such as *1 through *9 are for speed dials. So as a workaround,  to configure the desired number (e.g.: *115) as a speed dial or create a translation pattern on CUCM to translate 115 to *115.

Hi Javier, This is common issue, try creating a new phone template and try adding the phones again, and if possible do not add the line field.. also there are many issues when using office 2010... also try also when uploading the file to the call man...

Hi Ayaz, Can you send the output of show status from the call manager CLI, its seen sometimes when call manager is running from a long time this issue appears.. Thanks Rishi