Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to configure multicast on a pair of SG300 switches. My source devices are a TV transcoder which puts out 23 channels, each on a seperate multicast address (224.1.1.x), and an IP CCTV camera outputting on 224.1.1.100. These connect using a...
Hi,I have 3 switches (ESW520 and 2x 2960-s) configured in a star configuration. One 2960 and ESW520 both have multicast cameras connected, the other 2960s has the recording and viewing equipment connected. I have enabled IGMP snoop...
Hi,I have a customer with a uc560 who wishes to limit certain extensions (not all) to make outgoing calls using numbers in the local directory only. i.e, can dial emergency nad numbers in the local directory only. Other extensions remain able to dail...
I am trying to use 7925G wireless handsets with a UC560. I have a CT2504 controlling the WAP. VLAN 1 is 192.168.10.x/24, VLAN 90 is 10.1.10.1/30, VLAN100 (voice) is 10.1.1.x/24. Switch ports have smartports set for AP, or phone+des...
All calls from the main number, 02 1234 0400 go to extension 412.Other numbers can be direct dialled eg 02 1234 0420 goes to x420Incoming lines are ISDN BRIRegards,Brian TullochTechnical Manager(07) 4842 39290438 169 465
