About antione-smith

antione-smith · 10-13-2015

Hola.Need quick help to identify where MPLS LDP issue is, PE to P, take a look below, can be quick fix, but interesting issue. I have 7606 MPLS PE router, IOS Version 12.2(33)SRC4, with following mods: 1-subslot SPA Interface Processor-600 7600-SIP-...

antione-smith · 08-27-2015

Hi.I need help with VRF to GRT leaking.I am running 12.2(33)SRE8 and able to import from GRT to VRF very easy using:ip vrf solar rd 65500:200025 import ipv4 unicast map solar_import_global export map solar_export_globalBut as you can see above the ex...

antione-smith · 06-26-2009

Im looking for the password recovery procedure for the ME 3400 series switches. Couldn't find it searching Cisco.com

antione-smith · 10-09-2007

While creating the master end of a cross connect between a RPM_PR & AXSM I am getting the following error:addcon 8 0 50 5 1 -slave 4700918100000000016444472000000107730100.0.50 -lpcr 4000 -rpcr 4000 -lscr 4000 -rscr 4000ERR: Error in traffic paramete...

antione-smith · 08-29-2004

I am unable to establish a pnni link between two mgx8850's (pxm45 and pxm1e) release 3.0.23.202 due to the pnni port on the pxm1e node status stuck in auto config. Have tried already downing and upping the port on both sides, downing and upping ilmi...

antione-smith · 10-14-2015

Hi Akash,Thank you so much!!Nail on the head, 100% success immediately.PE1(config)#mpls ldp neighbor 10.100.100.1 password ctB$1PMPE1#sh mpls ldp neigh 10.100.100.1 Peer LDP Ident: 10.100.100.1:0; Local LDP Ident 10.100.100.214:0 TCP connec...

antione-smith · 10-14-2015

Hi Vint,Thanks for reply.. I agree, code on these boxes are too old, but the boxes will swap out soon.Actually, I am not seeing LDP from both ways:P to PE via loopbackP1#sh ip route 10.100.100.214Routing entry for 10.100.100.214/32 Known via "ospf 1...

antione-smith · 06-26-2009

thanks!

antione-smith · 06-26-2009

I found it!Procedure with Password Recovery Enabled If the password-recovery mechanism is enabled, this message appears: The system has been interrupted, or encountered an error during initializion of the flash filesystem. The following commands will...

antione-smith · 10-15-2007

I am not sure which connection you are referring to, but the problem I was having was a result of a missing statement.interface Switch1.1 point-to-point description Cross connect to AXSM ip address 192.168.1.1 255.255.255.252 no ip route-cache pvc 0/...

Member Since	‎04-28-2003 08:05 AM
Date Last Visited	‎03-04-2020 12:17 AM
Posts	12

User Statistics

User Activity

Help - core LSP broken - unusable: no label

Export vrf to global without ipv4 unicast map command... old IOS 12.2(33)SRE8

ME 3400 password recovery

MGX 8850 RPM_PR slave to AXSM master cross connect

MGX8850 pnni port status auto config

Hi Akash,Thank you so much!

Hi Vint,Thanks for reply.. I

Re: ME 3400 password recovery

Re: ME 3400 password recovery

Re: MGX 8850 RPM_PR slave to AXSM master cross connect