Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are setting up OTV on the N7K in unicast mode. Do I still need IGMP v3 configured on the join interface ? And then on the Other side of the Join interface does that interface need IGMP v3 enabled as well? exampleProduction VDC:interface port-ch...
Is it possible to split data flows on a single T1. Say 1 Flow on time-slots 5-6 and another data flow on time-slots 10-14. If one was data and the other voice would this work?
I have 2 1gb wan ethernet pipes coming into our new building. Our ISP has brought both connections in on the same (vlan) on their end (non internet). I basically need this setup so I get the best performance out of the 2 1gb connections. The provi...
after upgrading my computer from windows 7 RC1 to Windows 7 Pro x64 bit my clientless ssl vpn smart tunnels now longer work. Is everyone else have this issue. Does anyone know when Windows 7 will be supported ?
Has any one been able to access mapped drives using the smart tunnels under the clientless ssl vpn. I have tried allowing explorer.exe, net.exe, net1.exe in the application list. But it still doesn't work. Has anyone ever tried this ?
vPC+ is now supported with the fex on the 7000's using 6.1 code. This means fabricpath for it to work though.http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/release/notes/61_nx-os_release_note.html#wp511563
So I have been looking at this module on a 2911 router. VWIC3-2MFT-T1Is it safe to say that the TDM time-slots can be broken out from the router via the 2nd interface on the VWIC to plug in the a Radio Switch?
I will do this if its all IP based traffic.. I am finding out more information. The second time-slots are for radio traffic. I am trying to find out if its IP based radio traffic or not.
We have to encrypt every packet on our network. (dang FBI mandates). I really would like to bundle or channel the to links (layer 2 solution) and use a vlan interface for the IP, and to maximize the 2 connections. Not just a failover connection. ...
