We are setting up OTV on the N7K in unicast mode. Do I still need IGMP v3 configured on the join interface ? And then on the Other side of the Join interface does that interface need IGMP v3 enabled as well? exampleProduction VDC:interface port-ch...
Is it possible to split data flows on a single T1. Say 1 Flow on time-slots 5-6 and another data flow on time-slots 10-14. If one was data and the other voice would this work?
I have 2 1gb wan ethernet pipes coming into our new building. Our ISP has brought both connections in on the same (vlan) on their end (non internet). I basically need this setup so I get the best performance out of the 2 1gb connections. The provi...
after upgrading my computer from windows 7 RC1 to Windows 7 Pro x64 bit my clientless ssl vpn smart tunnels now longer work. Is everyone else have this issue. Does anyone know when Windows 7 will be supported ?
Has any one been able to access mapped drives using the smart tunnels under the clientless ssl vpn. I have tried allowing explorer.exe, net.exe, net1.exe in the application list. But it still doesn't work. Has anyone ever tried this ?
vPC+ is now supported with the fex on the 7000's using 6.1 code. This means fabricpath for it to work though.http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/release/notes/61_nx-os_release_note.html#wp511563
So I have been looking at this module on a 2911 router. VWIC3-2MFT-T1Is it safe to say that the TDM time-slots can be broken out from the router via the 2nd interface on the VWIC to plug in the a Radio Switch?
I will do this if its all IP based traffic.. I am finding out more information. The second time-slots are for radio traffic. I am trying to find out if its IP based radio traffic or not.
We have to encrypt every packet on our network. (dang FBI mandates). I really would like to bundle or channel the to links (layer 2 solution) and use a vlan interface for the IP, and to maximize the 2 connections. Not just a failover connection. ...
