Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
There is a doc that tells how is generated CUACS Registration Key?
I have a customer that is frequently changing the registration key, but he doesnt knows what parameter on windows could affect this value.
TIA
Andres Pasten
ENTEL S.A.
Hi,
We have a bunch of CUCM clusters (originally on v8.6) that communicate for internal calls with gatekeeper controlled trunks. On the core we have 2 gatekeepers on HA (Cisco 3925).
Now we´re upgrading our clusters to v10.5, and there are appearing ...
Hi,
We are working on an upgrade from cucm v8.6 to v10.5, and previously we´re on the ip phones upgrade of his firmware.
But customer has some remote locations with slow links, and upgrade is not possible to complete, and then ip phones stay on a loo...
Hi,
We've received several 8941 phones using firmware 9.3(4) SIP, but I've previously configured on CUCM using firmware SCCP. We've other 8941 working before with SCCP, so I dont want to leave some 8941 with SCCP and others with SIP.
This 8941 SIP do...
Hi,We have deployed Cisco Attendant Console Standard 10.5 with CUCM 8.6, over Windows 7. And we have the following issues:- Call control error when trying to transfer a call that was answered on the cisco ip phone, and that call is not showed as answ...
Hi Chris,
Thanks, I'll try on low traffic hour that debug.
Yes inbound calls normally works. The only hint that we have is that random call that receive High Traffic.
Hi Chris,
Yes, clusters 10.5 are present with their servers, for example this one has the alerts, but whole 3 servers are present.
GKP-AMN#show gatekeeper endpoints | inc Zona-SS-Metro-Ori
10.201.137.2 54666 10.201.137.2 47120 Zona-SS-Metro-O...
Hi Manish,
Thanks for your sooner answer.
There is a procedure to improve a load server? The url speaks as it is correctly configured, but it doesnt says the requirements for that.
On the disvantages it says:
• IP must be set on each phone
Does ...
Hi Manish,
The SCCP firmware default for 8941 is SCCP8941_8945.9-3-4-17. I've uploaded status messages and console logs of the phones, but we´re tryng now loading it with SIP firmware, maybe there is no evidence of the error loading SCCP firmware. P...
Hi, There is no qed file to enable these 78XX phones, as it is available for 3905 phones?3905 SIP IP Phone Enabler - Compatible CUCM Versions: 7.1(5)+ cmterm-3905-qed.9-2-1-0.cop.sgnI ask this because we have several clusters, and device package is a...
