Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone have a good debug q931 of an QSIG MWI to a Nortel 1000M or any other pbx? I am having issues lighting the Nortel phones MWI and am seeing some different bearer cap information than a standard station to station call. I have attached the...
I have followed the CCO docs to integrate an Avaya S8700 via QSIG PRI to UCM. I have Unity 5.0 integrated via SCCP but cannot get MWI accross the QSIG PRI to work. Besides the UCM Service parameters noted in the docs, are there any other parameters...
I am seeing some strange behavior for Call Handler standard greetings. When I configure a custom greeting and save the greeting, it gets disabled and the radio buttons are greyed out so I am unable to enable the standard greeting. Has anyone seen t...
Does anyone have this sample script that was posted by andigan. If so could your repost it. I have been trying to get this Agent Whisper feature going, but without success.Thanks in Advance.
I would recommend that you use voice translation rules for digit manipultaion and remove the dialplan-pattern command from your SRST configuration, as this has an affect on both outbound and inbound calls.
I would recommend that you use voice translation rules for digit manipultaion and remove the dialplan-pattern command from your SRST configuration, as this has an affect on both outbound and inbound calls.
Thanks for the reply. Why does the MWI request change the bearer to "Unrestricted Digital"? I have been modifying the number plan but with no success, I'll verify with their Nortel team. Do you remember what version of software they were running o...
