Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Hsa anyone succeeded making the CVR-QSFP28-SFP25G= work with a catalyst 9500 32C and a 25G SFP (LR or SR) ?We need a remote connection via fiber, the breakout cable doesn't help here.. Needless to say that we need 25G and not 10GThe box is running...
Hello everyone,I try to claim an MX device and receive the error: Device "xxxx-xxxx-xxxx" not found.I did few researches and found this could be due to the device being already claimed by another organization. We know the owner (a local distributor) ...
Hello everyone,It's my first time being here, and first time using meraki solutions for a POC purpose.I'm tasked to set up a SESE POC for a client and have few questions:- I want to use 2 MX routers, 1 at the branch site, and 1 at the HQ- 1 MR access...
Hi everyone,
We have a WLC connected to the CORE switch directly and I'm just wondering if it's required to configure DAI on the CORE switch, since all the users' traffic is tunneled to the WLC, I tried to check that in the configurations best practi...
Hi Ruan,
I fixed this back then by upgrading to another release (even though it was the recommended one I was using, it was affected too).
I switched all the APs to Client mode manually instead of automatic in the meantime. But the upgrade if I remem...
Yes I am, as suggested by ww (comment below mine) switching to the old version of the dashboard shows a different error: The following devices are already in use xxxx-xxxx-xxxx, so I assume the SN is correct
This is actually interesting, unfortunately didn't solve the problem.It says indeed that the device is already claimed. "The following devices are already in use"
This is actually what I see when I try to add the device to our organization.So I understand there is no solution to this, unless the device is removed from the old organization.I'll check with the distributor to check of the SN is wrong.
Hi,The appliance belongs to a local distributor in the country, we've got it for a POC purpose only and give it back after the trial period.The problem is that the distributor has no idea who claimed the appliance before.
