Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'd like to know if someone has experienced this and if some solution was found.Problem is that at some C65K I have directly connected Unix servers and the don't show MAC address at port, and same has happened at 3560 switched where I have too Unix b...
We are creating an Ipsec tunnel over the internet to another site but is not working, could someone help me on what could be happening?My config:version 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service passw...
We have a hosting/housing supplier that provides us connecivity through two links and we are using HSRP.Las week after rebooting our router, it stopped reaching specifically the HSRP address at the suppliers routers, but still can reach the real addr...
Hi,We use ACS for authenticating equipments but lately when loose conectivity with server, equipments do not allow us to enter "enable" mode (even at console) only at first level, so could somebody give some light on where am I missing something?Here...
I agrre on wht Joseph has posted because for example one of SPs here changes a lot the AS numbers and breakes my prepends. So, when started using the "bgp bestpath as-path multipath-relax ", ballancing started really working without interference from...
Using the sh mac-address at switch found this address at one other supplier's router, that ha been working for the last 3 years without problem en know decided to call attentiom. Apparentally no bug or problem or even config mistake.Good case to stud...
These are information at SP main router that answers for HSRP:Renault-Principal#sho arpProtocol Address Age (min) Hardware Addr Type InterfaceInternet 10.216.16.177 18 588d.095d.35a2 ARPA FastEthernet0/0Internet 10.216....
I'm looking but they belong to the range and are not active.Other strange thing is about the Int BVI11 that is showing MAC as 0:BVI11 is up, line protocol is up Hardware is BVI, address is 588d.095d.35a2 (bia 0000.0000.0000)I've tried to use the M...
