Hi,
We have been facing a strange issue in our network. When we implement an ACL on a router or a L3 switch at branch end the Citrix App launch or any other web services are getting slow. But when we access the same application without ACL, it's ve...
Dear All, Recently we are facing high CPU at our MPLS router. I've observed that, even though the total processes cpu utilization is high but there are hardly 5 processes above 0.00% and cumulatively contributing less than 2%. We want to know what is...
Hi... I'm new to Firewalls. I got some new requirement. We have requirement like "we having 2 Outside interfaces working as Active and Backup" and we have vpn url which is mapped to primary Outside interface IP. ...
Dear Team,I've been facing a unknown problem which is not letting me sleep in the nights.I'm getting huge packet drops (not continuesly) to the MGMT (VLAN 900) Ip address. The Interface of the VLAN is UP and all other VLANS in that switch are woking ...
Dear Team, As per the requirement i've created 10 VLANs. and also configued HSRP for failover. Out of 10 Vlans we have configured DHCP for 2 VLANs in the active switch.My concerns:1. Do we have to configure DHCP in standby switch too?2. If yes, i...
We did the same and allowed the required dependencies which were getting blocked earlier. Now the application started working normal. Thanks for your response.
Dear Mohamed Sobair,Thansk for your help. I've done the configuration according to your suggestion and it's working fine.Regards,Vamsi Harish.T.vamsiharish@gmail.com
Hi,Thanks for your valuable replay and also sorry for the dealy in responce. I've configured Power Stacking as you adviced. It's working fine.Regards,Vamsi Harish.T.E-mail:vamsiharish@gmail.com
