About maloyal

maloyal · 07-27-2021

I searched and couldn't find definitive steps/answer:My 4507 is showing a faulty supervisor:Chassis Type : WS-C4507R Power consumed by backplane : 40 Watts Mod Ports Card Type Model Serial No. ---+-----+---...

maloyal · 07-19-2021

Hello,In our LAN we had two 4507R's, we removed 1 and currently have 1 in production.Both units should have the following specs:Catalyst 4500 L3 Switch Software (cat4500-IPBASE-M), Version 12.2(37)SG1, RELEASE SOFTWARE (fc2)MPC8245 CPU at 266Mhz, Sup...

maloyal · 05-01-2016

Hello, i have a Unity 5.0 ES85 and Exchange 2010 SP3 running since bout 2013. After reboots for monthly updates, 1st Exchange then Unity, unity will continually give this message: The following Information Store has come back online: CN=MBX DB,CN=Dat...

maloyal · 01-14-2016

Hello, we have a Catalyst Express 500-24PC that's 8 years old and seems to be acting up. Phones are going dead and calls will have no sound and/or ring busy. A reboot of the CE500 seems to fix the issues for a day or so. What is a suitable replaceme...

maloyal · 12-10-2015

hello, a while back we upgraded our cable isp to 50/10Mb setup at one of our remote offices. Since then our performance thru the Cisco 2801 has been pretty abysmal. Sometimes we can get 40 down but never more than 1Mb up. Sometimes, the download will...

maloyal · 08-06-2021

@apogeenet wrote:Yes, as follows:Switch> enableSwitch# configure terminalEnter configuration commands, one per line. End with CNTL/Z.Switch(config)# redundancySwitch(config-red)# mode ssoSwitch(config-red)# endSwitch# show redundancyOk ran it, said i...

maloyal · 08-02-2021

The replacement sup is from an identical 4507 that we purchased @ the same time as the one in production, it was just decommissioned bout a year ago.I put in the replacement supe and the redundancy mode now shows RPR and Standby Cold. Do i just set m...

maloyal · 07-28-2021

@Giuseppe Larosa wrote:Hello @maloyal ,remember that the second supervisory is not operational this is the reason why you are not able to retrieve and upload files via TFTP.in some cases the slavebootflash: is not accessible at all when a sup is faul...

maloyal · 07-27-2021

Ok in the current 4507 i looked @ the bootflashes:4507_Data#show bootflash: -#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name 1 .. image 159C7F28 C123A0 32 12395296 Nov 5 2007 07:50:58 -06:00 cat4500-ipba...

maloyal · 07-21-2021

Ok dug out the old 4507 and these were POE blades as well. was wanting one without POE because the current ones are causing goofy issues overriding downstream power injector. I think i got that figured out by power inline never and then connecting/po...

Member Since	‎01-23-2008 02:34 PM
Date Last Visited	‎08-09-2021 07:44 AM
Posts	73
Total Helpful Votes Received	15

User Statistics

User Activity

Replacing faulty 4507 Supervisor

Cisco 4507R Line Card swap question

Unity 5 CiscoUnity_AvWm events

Catalyst Express 500-24PC replacement

Slow 2801 performance

Re: Replacing faulty 4507 Supervisor

Re: Replacing faulty 4507 Supervisor

Re: Replacing faulty 4507 Supervisor

Re: Replacing faulty 4507 Supervisor

Re: Cisco 4507R Line Card swap question