Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have upgraded varies switches and routers in the past. I have been tasked to upgrade the IOS on two 4500X switches I configured and IP address on the management port as well as my laptop, but can not ping the laptop or the 4500X. The only way I can...
We have a terminal server installed and it is a MRV 4000 does anyone know if there is a list of comands that show you how to access particular ports?We have a couple of routers on it, but I can not seem to figure out the command to access the devices...
I have a customer that is currently on Unity 7.0 and Exchange 2003. They are building a new 2007 Server and want to intergrate it with Unity 7.0. Does anyone have any documentation or videos on how to do the migration?
I upgraded the publisher from 7.0 to 9.1 and restored the back up. The cluster had a previous sub, I did not upgrade the sub I did a fresh install directly to 9.1 using the same IP as the previous Sub. During the install of the sub during the validat...
I need a link for a good video that shows how to sent up an Auto Attendant with CUCM 7.13 and Unity Connections. I need to set one up for a client and can not find a good straight forward document or video on Youtube. Can someone help me?
This is what I have come up with so far can you let me know if I am missing anything or am totally off base? voice translation-rule 10 rule 1 /856 555 1212/ /5678/Voice translation-profile Reroute_callertranslate called 10dial-peer voice 100Voice tra...
Can you send a copy of the complete dial peer configuration you used ie the, voice translation profile and destination patter... I want to see an example so that I can try on our gateway.. We are dealing with the same issue the answer address 5205551...
I am running into the same issue, if the fix is to upgrade from 03.05.02 to 03.05.03. How do you upgrade the IOS without being able to send traffic from laptop to my fa1 port on the 4500X?
I have a customer that is on and MCS cluster they are running cucm 7.0 and Unity 4.0. I back up the pub as the sub had issues. Then upgraded them to 9.1 on UCS when I go to add the sub it I get configuration validation failed. I verified that I can r...
