Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a couple of codec's in the lab here that will work sometimes, and sometimes won't. They're running the latest 7.3.0 code and registering to CUCM 10.5.1SU1. I've tried factory resetting them and get the same result. I've manually configured the...
As the title suggests, I've got 2 C20 codecs running the latest 7.3.0 code I can download registered to UCM 10.5.1 SU1. Power cycling or resetting them causes the auto-answer to default to off. There is still no way to change auto-answer from withi...
New install of UCCX 8.0(2). I've installed the Historical Reporting client on my laptop running Windows 7. When I attempt to load the client it pops up with 2 error dialog boxes saying "Unexpected error; quitting" with the only option being OK. Att...
Has this process changed, or is it different for the IX5x00 units? I've tried this on 4 panels in all different states of operation, and none of them respond to the mute press for 10 seconds (or 20, or 60 for that matter).
This was for two C20's. I think I found the issue. About 1 out of every 3 reset/power cycles they would work the rest they would not. Basically, I was using DHCP to assign IP, but manually assigning DNS. You are able to do this on most machines, bu...
Saw that and it ended up being the right direction, but since I was on a different version I wasn't able to use that device pack.So, I found out the following from TAC: Auto-Answer became a configurable field presented to UCM in TC7.2.x, but the appr...
