Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everybody,
i have following problem:
i installed Cisco IM and Presence Server 11.5 (IP: 172.16.2.238)
This installed Server is authenticated with temporary installed CUCM Publisher ver. 11.5 (IP: 172.16.2.200)
Both machine installed as Ver 11.0...
Hi everyone,
following situation;
We bought a Wildcard Certificate *.ourdomain.com. For this i created a request on Cisco ASA. Then i send this request to Certification Authority and i received the certificate for installing on ASA. That works fine...
hi@alll
we have two 6509 switches configured with VSS. Few days ago we had a power cut and both switches was down.
After both switches coming up again but with issues.
installed IOS image is: s72033_rp_ADIPSERVICESK9_WAN_VM 12.2(33)SXI2a
I could fin...
Hello,
i our IT-Lab we are running two Nexus 5672UP devices configured with HSRP, VPC Peer link and for our ip segments the interface vlan`s.
My questions, what can I do to prevent the routing between networks?
Our Network is defined with three main ...
Hello,
we have in our demo lab one Exchange server and one Web server. From our provider we got a block of public ip addresses.
I want to use one public ip for nat for both server.
Exchange Server has 172.18.220.10
Web Server has 172.18.220.11
Both...
Iam trying to install IM&P with installation file "Bootable_UCSInstall_CUP_11.0.1.10000-6.sgn.iso
The installation process don`t ask me "Would You Like to Apply A Patch as part of the upgrade"
in this documentation Installation Guide for Cisco Unifi...
I found some document about changing IP from CUCM Publisher and IM&P within a cluster but no if i want to bind the IM&P to other CUCM Publisher.
I tried under Cisco Unified IM and Presence OS Administration - Settings - IP - Publisher
to change the H...
Hi Deepak,
i have forgotten to say. Our CUCM Cluster (Vers.11.x) are running since last year. We ordered NFR bundle Vers. 11.0. The CUCM Cluster are installed first with 11.0 then later we upgraded to 11.5
Now, we want to use Cisco Jabber and need th...
Hi Dejan,
so now i could resolved my problem.
I exported the PKCS12 file from my ASA again with format .pfx
Nest Step; i used OpenSSL 32bit version to get the private key.
following commands i used:
openssl.exe base64 -in GSC.pfx -d -out GSC.bin
open...
Hi Dejan,
no for csr request, you dont need a passphrase or you cant set any passphrase.
When i create csr request on ASA, he give me also the info thats a PKCS10 enrollment request (CSR).....
It is only one file with content:
-----BEGIN CERTIFICATE ...
