Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm trying to set up a remote lab and I'm stuck on a very stupid problem:I need to ensure I'll still have an access to the devices in the lab even after studends possibly set/change passwords / play with aaa, etc.So, I need to be able to drop ...
Hello,We are actually running an MPLS network, and we need for a specific project to bridge one VLAN between a couple of routers and switches.But, if we try to bridge the vlan on the routers using dot1q sub-interfaces on an interface which is also ru...
Hello,
When you asked, one month ago, it wasn't the case. Since November 1st, it is supported [1], if you have the right version (7.0(3)l5(1)) -- and are confident enough to use an NX-OS release that's barely one month old
Supported FEX ModulesCi...
muthanaalwaeli2050 said:2.2 IP Addressing Requirements[...]As the public IP address (Internet) please use the 142.48.2.0/30. A DHCP server will be used for IP addresses allocation on the network.[...]b) The WAN (Wide area network) cable from the Inte...
Hi,if it's for an assignment, can you paste the exact problem description ?(could be a /30 is available, you manage both the ISP and client-side, you could cut your /30 into two /31 for dual connectivity...)Not enough information with what you posted...
Hello,Documentation states that licensing on the ASR 1000 are now honor-based since 3.7s. I didn't test it though.Basically, your license marked now as "EvalRTU" will be moved to an "RTU" license, indicating you would need to buy a license to keep yo...
Hi !Thanks for this wrap-up on the scenario (upstream-nexus: with hosts) - (UCS: without physical srvs) - (1KV: hosting vms).First, I agree, you should use a different vlan as primary, swapping primary and isolated on the middle hop could be extremel...
