Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to modify internal DN presentation using a fairly well documented process with different partitions and CSS's, and all that is working great at the moment. The hitch I ran into is that we have 2-digit endpoints for a few critical services...
I am trying to modify internal DN presentation using a fairly well documented process with different partitions and CSS's, and all that is working great at the moment. The hitch I ran into is that we have 2-digit endpoints for a few critical services...
Apparently we have been fighting this issue for a while, we just did not test properly to pick it up. Calls from external numbers and internal numbers all park just fine. The problem is that if I call from two external numbers and get parked, I will ...
I have done a lot of reading about PLAR and have configured it successfully on some test sets. My question/frustration here is around how this is isolated to specific hardware devices that are marked as hotline devices. What I would like to have is a...
I searched around the forums with no real success in matching the symptoms that I observed, so I am posting to see if I can get something going. There are obviously any number of variables when comparing configurations on client machines, so I am not...
As a quick update, I am accomplishing this using a total of 5 translation rules to get around all the numbers. The regex on each of them is:
[1-2][0-9]XX
3[0-25-9]XX
4XXX
5[0-46-9]XX
[6-8]XXX
Seems to work pretty good, but I was really hoping to ...
As a quick update, I am accomplishing this using a total of 5 translation rules to get around all the numbers. The regex on each of them is:[1-2][0-9]XX3[0-25-9]XX4XXX5[0-46-9]XX[6-8]XXXSeems to work pretty good, but I was really hoping to get it all...
Gordon, did you ever find a resolution to this? I went through a similar process recently, and have even created a case with TAC. My "engineer" disabled the LOM Option ROM's and the server was able to boot, but ESXi doesn't see the onboard NIC's (as ...
Unfortunately we were never able to resolve the issue on the platform I originally experienced it on. However, the specific user that I was working with received a hardware upgrade several weeks later, and we did not observe the same issue on the new...
