Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How many 40-MHz,80-MHz & 160MHz channels are available 5GHz spectrum in US (new -B regulatory domain) & India ?
with available 80MHz or 160MHz channels, can we plan high density wireless over-voice & video?
what are expected limitations will run into...
Hello Folks,I tried creating L3 on Nexus 7K & got message "% Deleted all L3 config on interface Vlan136" there was no existing vlan 136.Is it standard behivour in Nexus ? X7K01(config)#7K01(config)# vlan 1367K01(config-vlan)# name Dev-1367K01(config-...
what cisco hardware support NAT64 configuration ??http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat64-stateful.html#GUID-D99E4D45-F2E9-44FE-855A-41F594B0F046
I did IOS upgrade in 4510R+E to #show version Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.09.01.E RELEASE SOFTWARE (fc1)
post booting switch lost radius config & when try to reconfigure...
I am trying to set up a IPv6 lab. I am trying to establish connectivity between IPv4 network to IPv6 network. I have CISCO2921/K9 router. I have done the configuration with the reference of>>> http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr...
I have below router CISCO2921 I want to create a test IPv6 lab.IPv4 IPs> talking to IPv6 IPs & vice versa. I copied the config from cisco sites bit didnt help me.can you please suggest what am I missing here.As soon as I apply command"nat64 v6v4 list...
