Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, we have a CME and what is needed is to host conferences; Participants from outside will call into a specific number then they will be prompted for a code to join the conference or get it started. Please advise what should be done or needed for...
Hi all,I am getting a strange caller id on my 292 extension such as (22428, 22112, ...) whenever I try to call from the PSTN to the number associated to the voice port 0/0/1. I don't have any translations implemented. If the line provided from the Te...
Im having a weird issue; I can ping my exchange, connect to it remotely (rdp) through the internet eventhough I am specifying the ports in my static pat. If I add the overload command to my Exchange pool then its blocking all the unspecified ports ...
I am trying to publish my exchange server through a router using static nat : ip nat inside source static 192.168.X.X Public_IP_Address Everything work well For improved security I wanted to use static Pat with the following: ip nat inside source sta...
Hi all,I am not familiar with the graphical interface of the SG 200-50P but I need to configure a dual data and voice vlan on a port. I disabled globally the smarport and Auto Voice Vlan feature on the switch.Data Vlan : 2Voice Vlan: 3All ports conne...
I already tried it, I called from a line 22XXXXXXX (which is another FXO port on the same router) and it seems that some digits are being stripped from the caller id (digits stripped randomly from the middle and the end), please have a look, the c...
Hi Raju,I totally agree about what you are saying but the problem is that im having a weird issue; I can ping my exchange, connect to it remotely ... eventhough I am specifying the ports in my static pat. If I add the overload command to my Exchange ...
Hi Raju,My config became like the following:ip nat pool Exchange 1.1.1.1 1.1.1.1 prefix-length Xip nat inside source list 2 pool Exchange ip nat inside source static tcp 192.168.X.X 25 1.1.1.1 25 extendableip nat inside source static tcp 192.168.X.X ...
You are right Raju, I dont have a dynamic nat for traffic from exchange, the dynamic nat is only configured for the internal users. I thought static nat with ports will have the same effect as static nat without port, meaning that it will allow tr...
