Hello, we use the 8831 with 802.1x. I could not find where i can enter the MD5 shared secret within the Phones security settings. Under security setup - 802.1x Authentication  i only can enable Device Authentication and check the Transaction Status.   There is no way to enter the Password.   we use the latest Firmware 9-3-3-5 Does anyone have a hint?   br Michael Juch ... View more

Hello, we use a CUBE between Provider and CUCM. Within incomming Invites we received the "Blocknumer without DDI" in the Header and the Number with DDI in the TO: Address. The outgoing Dial-peer matches and send the Call to CUCM but only with the Blocknumber without DDI. It seems that the TO: Address is not used. Is this configurable?? br Mike incomming Invite Received: INVITE sip:08912345@212.202.129.51:5060 SIP/2.0 Via: SIP/2.0/UDP 213.148.136.218:5060;branch=z9hG4bK20cbo9309811o85t37l1.1 Call-ID: SDfa23e01-1497777e363b30dd0ca9b75e31675e26-l65h8l3 From: <sip: 004921112345@qsc.de ;user=phone>;tag=SDfa23e01-70ahhhs8-CC-34 To: <sip:0891234515@qsc.de;user=phone> CSeq: 1 INVITE Max-Forwards: 63 Contact: <sip:004921187554138@213.148.136.218:5060;transport=udp> Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,REGISTER,INFO,PRACK,SUBSCRIBE,NOTIFY,UPDATE,MESSAGE,REFER User-Agent: Huawei SoftX3000 V300R010 Supported: 100rel Content-Length: 321 Content-Type: application/sdp P-Called-Party-ID: <sip: 0891234515@qsc.de > X-ORIGINAL-DDI-URI: sip: 0891234515@qsc.de X-ORIGINAL-DDI-USER: 0891234515 X-CID: l0a0s75eae8hs05qnsarlhq18lla10n0@SoftX3000 v=0 o=HuaweiSoftX3000 66041570 66041570 IN IP4 213.148.136.218 s=Sip Call c=IN IP4 213.148.136.218 t=0 0 m=audio 37882 RTP/AVP 8 0 18 4 101 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=rtpmap:4 G723/8000 a=rtpmap:101 telephone-event/8000 a=ptime:20 a=fmtp:101 0-15 a=fmtp:18 annexb=yes     Invite to CUCM Sent: INVITE sip:08912345@10.32.8.21:5060 SIP/2.0 Via: SIP/2.0/UDP 212.202.129.51:5060;branch=z9hG4bK281C98 From: <sip:004921187554138@213.148.136.218>;tag=D52E94-C32 To: <sip:08912345@10.32.8.21> Date: Tue, 17 Dec 2013 14:15:46 GMT Call-ID: 8E4752FC-665C11E3-8028EC8D-417B9213@10.32.8.1 Supported: 100rel,timer,resource-priority,replaces,sdp-anat Min-SE:  90 Cisco-Guid: 2386959020-1717309923-2149772429-1098617363 User-Agent: Cisco-SIPGateway/IOS-15.3.2.T1 Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER CSeq: 101 INVITE Timestamp: 1387289746 Contact: <sip:004921187554138@212.202.129.51:5060> Expires: 180 Allow-Events: telephone-event Max-Forwards: 62 ... View more

                   Hello, when we generate a CSR for xmpp Certificate in Presence Server to Authenticate Jabber, the CUPs included two dNSName SAN's - <FQDN> - sip:CN=<FQDN> This SAN are not configurable. Now some CA's have Problems with special characters in the SAN field. Here it is : and = Are there any plans to change the CSR behavior for xmpp in the future like for the Tomcat Certificate (set web-security) or exist an other solution to delete the SAN (sip:CN=....) BR Michael ... View more

Hello, how can i remove participants from conference which was created with Jabber for Windows 9.2.1 and cucm 9.1.1? In released notes for Jabber4W 9.2.1 you find following: Known Issues, Limitations, and Important Notes Removing Participants from Conference Calls The functionality to remove participants from conference calls while using software phone devices is available on Cisco Unified Communications Manager version 8.6.2 and higher. Known Issues, Limitations, and Important Notes Removing Participants from Conference Calls The functionality to remove participants from conference calls while using software phone devices is available on Cisco Unified Communications Manager version 8.6.2 and higher. I tried with Softphonemode but the "remove" link is greyed out. br Mike ... View more

                   Hello, i use a cucm 9.1.1a cluster and try to configure DVO. 1st i configured a Mobility Profile. Then i create a TCT Device (IPhone dual Phone) and try to configure a Mobility Identity. I can save the Mobility Identity whe i do not select a Mobility Profile. When i select the previous configured Mobility Profile a get following error Message when i try to save the configuration: Update failed. TypeDbErrors.gen25288 i did not found anything which give a hint what could be a reason. I get this Message with 9.1.1 and also after Upgrade to 9.1.1a br Mike ... View more

Hello, I'm looking for an CUCM Inventory Tool. It must be able to make automatic (scheduled) Reports from the CUCM Phone Configuration (like Phone Export all Details) in CSV Format. We would like to use it to get necessary Informations for an Asset Management System. Uplinx Report Tool and Phone Inventory from VoipIntegration are not scheduled. The reports here are only on Demand. br Michael Juch ... View more

                   Hello, is there a possibility to give the 69XX or 8961 Phone a Display Info when the Phone is in SRST mode? The system messages in voice register global and call-manager-fallback seems to be not supported for this Phonetypes. br Michael Juch ... View more

                   Hello, we have 99xx Phones which uses G.722 as Codec within CUCM 8.5.                    When i use Jabber for Windows Client 0.0.1 as softphone the codec is switched back to G711 (Call from Softphone to 99xx Phone)                    I read that Jabber should support G.722.                    Is there someone which  have the Jabber Softphone working with G.722? br Mike ... View more