Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About furdog
Stats
Member since
11-19-2002
32
Posts
0
Helpful
0
Solutions
Created by
furdog
in Other Collaboration Subjects
in Other Collaboration Subjects
03-30-2015
06:20 AM
03-30-2015
06:20 AM
I am trying to setup a SIP connection to Office 365 for voicemail integration on a CME 10.5. Does anyone have a step by step process or a dial-peer configuration sample?
... View more
Labels:
08-23-2013
11:58 AM
object-group service Facetime tcp port-object eq 16402 port-object eq 2483 port-object eq 51663 access-list in2out extended permit tcp any any object-group Facetime access-list out2in extended permit tcp any any object-group Facetime You can probably secure this more by designating only the ports that are requred specifically for in and out and further by limited the IP ranges that are accessed, but I needed to call my dauighter quick.
... View more
04-02-2013
11:25 AM
I have a Valcom SIP Paging device connected via SIP. We need to: be able to page phones inside the office only on Extension 500 be able to page on the Valcom SIP pager on Extension 501 be able to page on both the phones inside and the Valcom SIP paging device on 502 When I dial 500 in pages inside and works When I dial 501 is rings busy When I dial 502 is pages on both. I have the following setup: voice service voip ip address trusted list ipv4 64.xx.xx.xx no ip address trusted authenticate allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service sip moved-temporarily no supplementary-service sip refer sip registrar server expires max 600 min 60 ! voice class codec 1 codec preference 1 g729r8 ! ! voice class cause-code 1 no-circuit ! voice register global mode cme source-address 192.168.32.1 port 5060 max-dn 55 max-pool 15 hold-alert tftp-path flash: create profile sync 0035061647522308 ! voice register dn 11 number 501 name VIP10-Ch-1 no-reg ! voice register dn 12 number 502 name VIP10-Ch-2 no-reg ! voice register pool 1 id mac 00D0.5F00.FBE9 type P600 voice-class codec 1 username cisco password cisco ! voice register pool 2 id mac 00D0.5F00.FBE9 number 1 dn 11 number 2 dn 12 dtmf-relay rtp-nte no call-waiting codec g711ulaw ! ! ephone-dn-template 1 hold-alert 60 originator mwi-type both ! ! ephone-template 15 service phone headsetwidebandenable 1 softkeys idle Redial Pickup Dnd Join ConfList RmLstC softkeys seized Endcall Redial Pickup Cfwdall Callback softkeys connected Hold Endcall Trnsfer Confrn Park ConfList Select RmLstC button-layout 7931 2 speed-dial 1 502 label "Both-Page" speed-dial 2 501 label "Out-Page" speed-dial 3 500 label "In-Page" ! ! ephone-dn 11 number 101 no-reg primary label C0 - Line 01 name C0 - Line 01 trunk 111 monitor-port 0/1/0 ! ! ephone-dn 12 number 102 no-reg primary label CO - Line 02 name CO - Line 02 trunk 112 monitor-port 0/1/1 ! ! ephone-dn 13 number 103 no-reg primary label CO - Line 03 name CO - Line 03 trunk 113 monitor-port 0/1/2 ! ! ephone-dn 14 number 104 no-reg primary label CO - Line 04 name CO - Line 04 trunk 114 monitor-port 0/1/3 ! ! ephone-dn 21 number 201 no-reg primary label Ext 201 name Ext 201 ! ephone-dn 22 number 202 no-reg primary label Ext 202 name Ext 202 ! ephone-dn 50 number 500 no-reg primary description PAGING name PAGING paging ip 239.0.1.20 port 2000 ! ephone-dn 52 number 502 no-reg primary description PAGING & VALCOM name BOTH paging ip 239.0.1.21 port 2000 paging group 50,51 ! ephone 21 mac-address xxxx.xxxx.xxxx ephone-template 15 max-calls-per-button 2 paging-dn 50 type 7931 button 1:21 2m22 3m23 4m24 button 5m25 6m26 7m27 8m28 button 9m29 10m30 11m31 12m32 button 13:16 14:15 15:14 16:13 button 17:12 18:11 ! ! ! ephone 22 mac-address xxxx.xxxx.xxxx ephone-template 15 max-calls-per-button 2 paging-dn 50 type 7931 button 1:22 2m21 3m23 4m24 button 5m25 6m26 7m27 8m28 button 9m29 10m30 11m31 12m32 button 13:16 14:15 15:14 16:13 button 17:12 18:11
... View more
Labels:
02-02-2013
09:14 PM
Also note CSCtd26844 Cisco 500 phone registration fails when ephone tag is 56 or greater.
Symptom After a license upgrade from 48 to 64 user license on a UC520, the Cisco 500 series phone registration fails with the following errors in debug ephone register output: Error: Device Id 80000 Configured Device Id -1 StationSPCPRegisterTokenReject sent
on socket 4
Conditions Problem is seen when registering any 500 series phone to a CME on UC520 platforms. The problem only occurs when the ephone tag value for this phone registration is 56 or higher. Workaround Use an ephone tag that is of lower numerical value. Ephone 55 or lower will work. http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.html
... View more
02-02-2013
09:14 PM
http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.html CSCtd26844 Cisco 500 phone registration fails when ephone tag is 56 or greater.
Symptom After a license upgrade from 48 to 64 user license on a UC520, the Cisco 500 series phone registration fails with the following errors in debug ephone register output: Error: Device Id 80000 Configured Device Id -1 StationSPCPRegisterTokenReject sent
on socket 4
Conditions Problem is seen when registering any 500 series phone to a CME on UC520 platforms. The problem only occurs when the ephone tag value for this phone registration is 56 or higher. Workaround Use an ephone tag that is of lower numerical value. Ephone 55 or lower will work.
... View more
02-02-2013
09:14 PM
http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.html CSCtd26844 Cisco 500 phone registration fails when ephone tag is 56 or greater.
Symptom After a license upgrade from 48 to 64 user license on a UC520, the Cisco 500 series phone registration fails with the following errors in debug ephone register output: Error: Device Id 80000 Configured Device Id -1 StationSPCPRegisterTokenReject sent
on socket 4
Conditions Problem is seen when registering any 500 series phone to a CME on UC520 platforms. The problem only occurs when the ephone tag value for this phone registration is 56 or higher. Workaround Use an ephone tag that is of lower numerical value. Ephone 55 or lower will work.
... View more
02-02-2013
09:13 PM
I'd also recomend downloading the latest firmware for the phone as it does not appear in CCA. Odd's are your phones will take too long to boot as it's looking for firmware that isn't there. show telephony shows: load 525G2 spa525g-7-4-9c How to.... setup your tftp server http://tftpd32.jounin.net/tftpd32_download.html Download the firwmare for the phone http://www.cisco.com/cisco/web/download/index.html (I used SPA525G_7.5.4_FW.zip) Unzip the file (spa525g-7-5-4.bin and spa525g-7-5-4-bt.bin) into the folder that your TFTP Server points to. Make a folder for the 525G2 cd flash:/phones mkdir flash:/phones/525G2 copy tftp flash:/phones/525G2 Enable the files to be delivered: tftp-server flash:/phones/525G2/spa525g-7-5-4.bin alias spa525g-7-5-4.bin tftp-server flash:/phones/525G2/spa525g-7-5-4-bt.bin alias spa525g-7-5-4-bt.bin Tell the UC that this is the phone load you want delivered to the phones: telephony service load 525G2 spa525g-7-5-4-bt (spa525g-7-5-4-bt includes Bluetooth and spa525g-7-5-4 doesn't, you can only pick one. I like to have both available) Make sure that the ephone type is 525G2 on all the ephones that are 525G2. Mine were all setup as 525G too). Update all the ephones to change the types to 525G2. You can do a script to restart them as you update too... ie. ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset ! ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset Figuring out the CDP issue now . I'm having to tell each phone that it need to use the voice vlan. My fault to editing the CCA deliver to match existing vlans. I would have hoped that this would be an editable feature by now... Even worse that this phone and system have both been out for a long time and to not have any firmware for 525G2 available in the CCA is not nice!
... View more
02-02-2013
09:12 PM
Also note CSCtd26844 Cisco 500 phone registration fails when ephone tag is 56 or greater.
Symptom After a license upgrade from 48 to 64 user license on a UC520, the Cisco 500 series phone registration fails with the following errors in debug ephone register output: Error: Device Id 80000 Configured Device Id -1 StationSPCPRegisterTokenReject sent
on socket 4
Conditions Problem is seen when registering any 500 series phone to a CME on UC520 platforms. The problem only occurs when the ephone tag value for this phone registration is 56 or higher. Workaround Use an ephone tag that is of lower numerical value. Ephone 55 or lower will work. http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.html
... View more
02-02-2013
09:11 PM
Also note CSCtd26844 Cisco 500 phone registration fails when ephone tag is 56 or greater.
Symptom After a license upgrade from 48 to 64 user license on a UC520, the Cisco 500 series phone registration fails with the following errors in debug ephone register output: Error: Device Id 80000 Configured Device Id -1 StationSPCPRegisterTokenReject sent
on socket 4
Conditions Problem is seen when registering any 500 series phone to a CME on UC520 platforms. The problem only occurs when the ephone tag value for this phone registration is 56 or higher. Workaround Use an ephone tag that is of lower numerical value. Ephone 55 or lower will work. http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.html
... View more
02-02-2013
09:08 PM
I recomend downloading the latest firmware for the phone as it does not appear in CCA. Odd's are your phones will take too long to boot as it's looking for firmware that isn't there. You probably just need to change the ephone types to 525G2 (see bottom of post) show telephony shows: load 525G2 spa525g-7-4-9c How to.... setup your tftp server http://tftpd32.jounin.net/tftpd32_download.html Download the firwmare for the phone http://www.cisco.com/cisco/web/download/index.html (I used SPA525G_7.5.4_FW.zip) Unzip the file (spa525g-7-5-4.bin and spa525g-7-5-4-bt.bin) into the folder that your TFTP Server points to. Make a folder for the 525G2 cd flash:/phones mkdir flash:/phones/525G2 copy tftp flash:/phones/525G2 Enable the files to be delivered: tftp-server flash:/phones/525G2/spa525g-7-5-4.bin alias spa525g-7-5-4.bin tftp-server flash:/phones/525G2/spa525g-7-5-4-bt.bin alias spa525g-7-5-4-bt.bin Tell the UC that this is the phone load you want delivered to the phones: telephony service load 525G2 spa525g-7-5-4-bt (spa525g-7-5-4-bt includes Bluetooth and spa525g-7-5-4 doesn't, you can only pick one. I like to have both available) Make sure that the ephone type is 525G2 on all the ephones that are 525G2. Mine were all setup as 525G too). Update all the ephones to change the types to 525G2. You can do a script to restart them as you update too... ie. ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset ! ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset Figuring out the CDP issue now . I'm having to tell each phone that it need to use the voice vlan. My fault to editing the CCA deliver to match existing vlans. I would have hoped that this would be an editable feature by now... Even worse that this phone and system have both been out for a long time and to not have any firmware for 525G2 available in the CCA is not nice!
... View more
02-02-2013
09:06 PM
TAC doesn't support the UC450, Pro Services in North Carolina does. They don't support CLI, unless your certified I recomend downloading the latest firmware for the phone as it does not appear in CCA. Odd's are your phones will take too long to boot as it's looking for firmware that isn't there. You probably just need to change the ephone types to 525G2 (see bottom of post) show telephony shows: load 525G2 spa525g-7-4-9c How to.... setup your tftp server http://tftpd32.jounin.net/tftpd32_download.html Download the firwmare for the phone http://www.cisco.com/cisco/web/download/index.html (I used SPA525G_7.5.4_FW.zip) Unzip the file (spa525g-7-5-4.bin and spa525g-7-5-4-bt.bin) into the folder that your TFTP Server points to. Make a folder for the 525G2 cd flash:/phones mkdir flash:/phones/525G2 copy tftp flash:/phones/525G2 Enable the files to be delivered: tftp-server flash:/phones/525G2/spa525g-7-5-4.bin alias spa525g-7-5-4.bin tftp-server flash:/phones/525G2/spa525g-7-5-4-bt.bin alias spa525g-7-5-4-bt.bin Tell the UC that this is the phone load you want delivered to the phones: telephony service load 525G2 spa525g-7-5-4-bt (spa525g-7-5-4-bt includes Bluetooth and spa525g-7-5-4 doesn't, you can only pick one. I like to have both available) Make sure that the ephone type is 525G2 on all the ephones that are 525G2. Mine were all setup as 525G too). Update all the ephones to change the types to 525G2. You can do a script to restart them as you update too... ie. ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset ! ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset Figuring out the CDP issue now . I'm having to tell each phone that it need to use the voice vlan. My fault to editing the CCA deliver to match existing vlans. I would have hoped that this would be an editable feature by now... Even worse that this phone and system have both been out for a long time and to not have any firmware for 525G2 available in the CCA is not nice!
... View more
02-02-2013
09:04 PM
I'd also recomend downloading the latest firmware for the phone as it does not appear in CCA. Odd's are your phones will take too long to boot as it's looking for firmware that isn't there. show telephony shows: load 525G2 spa525g-7-4-9c How to.... setup your tftp server http://tftpd32.jounin.net/tftpd32_download.html Download the firwmare for the phone http://www.cisco.com/cisco/web/download/index.html (I used SPA525G_7.5.4_FW.zip) Unzip the file (spa525g-7-5-4.bin and spa525g-7-5-4-bt.bin) into the folder that your TFTP Server points to. Make a folder for the 525G2 cd flash:/phones mkdir flash:/phones/525G2 copy tftp flash:/phones/525G2 Enable the files to be delivered: tftp-server flash:/phones/525G2/spa525g-7-5-4.bin alias spa525g-7-5-4.bin tftp-server flash:/phones/525G2/spa525g-7-5-4-bt.bin alias spa525g-7-5-4-bt.bin Tell the UC that this is the phone load you want delivered to the phones: telephony service load 525G2 spa525g-7-5-4-bt (spa525g-7-5-4-bt includes Bluetooth and spa525g-7-5-4 doesn't, you can only pick one. I like to have both available) Make sure that the ephone type is 525G2 on all the ephones that are 525G2. Mine were all setup as 525G too). Update all the ephones to change the types to 525G2. You can do a script to restart them as you update too... ie. ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset ! ephone 7 type 525G2 reset ! ephone 8 type 525G2 reset ! ephone 9 type 525G2 reset Figuring out the CDP issue now . I'm having to tell each phone that it need to use the voice vlan. My fault to editing the CCA deliver to match existing vlans. I would have hoped that this would be an editable feature by now... Even worse that this phone and system have both been out for a long time and to not have any firmware for 525G2 available in the CCA is not nice!
... View more
03-14-2012
06:55 AM
Update the PSA’s configuration NIGHTLY when a new product is identified on a network. I would also like to see that data is populated in the configuration about the device. If OnPlus pulls in Data about a desktop, then have it pick the ConnectWise Desktop configuration. Same if it is an ASA firewall, then pick the corresponding configuration item in ConnectWise. Reporting Integration would be a great enhancement to ConnectWise. Management Summary Prepared for: Customer. Created on: 3/14/2012 Period: 2/13/2012 - 3/14/2012 Network Health: 100% Company Details: Contact: Customer Name Account Manager: TotalCareIT Total Windows Servers: 12 Total Windows Workstations: 230 Service Request Statistics: Escalated Items: Server Offline Alerts 2 Server Disk Space Low 0 Failed Backup Jobs 0 Total Closed Helpdesk Tickets 202 Business Continuity Indicators: Network Uptime: Server Availability 98% Threats Removed: Email Viruses Removed 448 Spam Items Removed 10,738
... View more
10-15-2011
11:42 PM
I have a number of 504G with sidecars on a UC540. Each phone is setup with a button of the other phones to transfer calls or make internal calls. When a user presses a button, we'd like to have the recipients phone auto answer in intercom with speaker phone. I can see how to get this to work this way from the doucmentation I've read I don't se how to make this happen.
... View more
Labels:
05-05-2015
Call Routing -> Dial Rules -> Application Dial Rules Name: Jabber Number
of Digits 10 Total Digits t...
05-04-2015
It needs to be installed on end user workstations and then set the Tapi
in CW while logged in as tha...
03-30-2015
Thank you. We had some routing issues between the DMZ and the LAN and
once I was able to ping the VC...
03-30-2015
I am trying to setup a SIP connection to Office 365 for voicemail
integration on a CME 10.5. Does an...
Created by
furdog
in TelePresence and Video Infrastructure
03-08-2015
03-08-2015
I have the connection from VCS-C to VCS-E working correctly VCS-C is on
the LAN and VCS-E is on the ...
03-08-2015
Got IT!! Install the Cisco TAPI 64-bit Client (or 32) from the Call
Manager Plugin's (Applications, ...
Created by
furdog
in Unified Communications Infrastructure
03-05-2015
03-05-2015
Out line of business application ConnectWise has a TAPI integration
ability. We have a BE6000 with C...
02-26-2015
I am trying to setup ATM for Unity on
10.5http://www.ciscounitytools.com/Applications/CxN/ATM/Help/C...
08-23-2013
object-group service Facetime tcp port-object eq 16402 port-object eq
2483 port-object eq 51663acces...
04-02-2013
I have a Valcom SIP Paging device connected via SIP. We need to:be able
to page phones inside the of...
02-02-2013
Also noteCSCtd26844 Cisco 500 phone registration fails when ephone tag
is 56 or greater. Symptom Aft...
02-02-2013
http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.htmlCSCtd26844
Cisco 500 phone regi...
02-02-2013
http://www.cisco.com/en/US/docs/ios/15_0/15_0x/15_01_XA/rn1800xa.htmlCSCtd26844
Cisco 500 phone regi...
Public Statistics
| Date Registered | 11-19-2002 09:55 AM |
| Date Last Visited | 05-08-2019 12:01 AM |
| Total Messages Posted | 32 |
