Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I want to setup a wlan environment with peap.When the remote user is successfully authenticated to a radius, the radius returns a vlan name.on the remote sites the vlan id differs. I need to match the vlan name to the vlan id on the remote locati...
Hi,We have a transparent firewall (fwsm) between 2 ospf neighbors.Although the ospf neighorship is formed and the ospf neighors are placed in FULL state the neighborship is teared down after dead timer expires.It seems to me that ospf hello is not pa...
Hi,We installed a cisco asa 5510 in front of our netwerk with a natrule point to the owa publishing rule of an MS Isa.Since we placed the asa in front of our network, clients are complaining that the sessions are disconnected after 3 minutes.Can this...
Hi,Our client has 2 cisco 3750 switches stacked together and we are seeing strange issues when configuring the switches. When i configure 2 ports on the lefthandside of our switch ex. port 1/0/1 and 2/0/1 my channel is working. When I copy the same c...
Hi,I'm very new to configuring wap.I want to configure multiple vlans on my wireless device 1242 AG.When i configure the AP with vlans, i don't reveice the SSID anymore, when configuring back to old config, everything working normal.The situation is ...
The flexconnect feature is working, you can link a vlan to SSID an rewrite it when logged on.The thing I'm looking for is the anwser from radius allows for rewriting to the vlan name specified in the radius request.I think it could work because the ...
Hi,Sorry about my incomplete post.I created a static nat entry. Is the xlate time-out related to a static nat entry? In my opinion,only to the dynamic pool as you suggested.I was thinking more in the direction of tcp time-out, but can't imagine tha...
Hi, I did some troubleshooting on that document, no problems with the stack ports. Both stackports on both switches are seen to be UP.Still the config on the other node is not syncronised.Best regardsJorg
Hi Collin,Thanks a lot! I asked to do a sh tech on both switchesThe problem is, I can't log a ticket with Cisco TAC as our customer didn't buy a smartnet for these. Thanks!Best regardsJorg