Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are using the option from Cisco Prime to select a radio and use the cisco spectrum analyzer tool to remotely analyse the spectrum on the channel of that particular interface on that AP. This still works fine on 2700/3700/2800/3800 AP's, but not on...
The AireOS config translator does not seem to get anything from the config of the existing AireOS controllers, we have multiple 5508 controllers running 8.5.151, but the translator tool on the 9800 controller or on the website WLC Config Converter (c...
Hi, we have recently installed Cisco DCNM 11.2.1 and enabled AAA with Cisco ISE as TACACS+ server. At the Cisco ISE server I have configured the TACACS profile with the custom attribute set to Mandatory name shell:roles and value network-admin. Auth...
Installing the latest patches of windows 8.1 apparently cause issues with Cisco AnyconnectThe security update 3023607 of Microsoft seems to be the root cause for this issue to at least multiple Anyconnect versions 3.1. Can anybody can share informati...
There might be another bug which is pointing to the same, we are seeing the high output discards messages also for old 3650 switches and the newer 9300/9500 switches. They seem to come at burst and we see them as P3 alarms in Catalyst Center. Accordi...
This would mean the failed message would occur on the regular rekey interval. Don't know if i mentionded that the client stays connected by theway. The thing is I upgraded one of these devices with a new firmware, and I don't see them anymore on that...
Interesting again, the Spectrum Expert on the 9120 AP by selecting the XOR 2.4 Ghz interface from Prime, measures actually the 2.4 Ghz Spectrum and the 5 Ghz Spectrum. You can select the frequency in the Control Pane. But in general it already measur...
Interesting, the 2.4 GHz interface does work on Prime 3.9 from an 9120 AP running on a 5520 controller. The 5 Ghz radio does not, the Spectrum expert program gives the error unable to contact remote sensor. Error in Spectrum Expert with the 5 Ghz int...
