Sorry I overlooked the quicktime streaming component from the original thread posting. I have confirmed with Cisco as you did that this is a limitation of the Quicktime player plug-in. ... View more

Button is there and present on 5.3 for me. Tested on Mac and PC and was able to view in fullscreen no problem. Are you on 5.3.10 running on UCS C220 or older C200/C210 appliances? ... View more

Peter, I recently came across the article you linked above for setting up the ISDN GW as an H.323 gateway. I have the same environment in a lab as you described verbatim. Originally I was experiencing the same problems as you. Instead of setting the gateway on the CUCM to the IP of your ISDN GW set it to your VCS control instead. Since your ISDN GW is registered to your VCS it will send out Admission Reject (ARJ) if you look in the H323 log on the ISDN GW. The article linked above appears to only work if you are using the ISDN GW's built in gatekeeper. Since you have a VCS as your gatekeeper this should work for you as it did for me.        ... View more

I'm not following you. The units are standalone DMPs which have been factory defaulted. FYI, we are running DMS 5.3 with valid licenses. ... View more

The DMPs are not registered to DMM. Both units have been reset to their factory defaults but still won't upgrade past 5.1. ... View more

I just received the 5.2.0 frmware from Cisco today. I tried to upgrade the 4400G from the web interface just as before and same result--it appears to take the firmware and upload and verify on the DMP. Then it automtically restarts but the firmware never takes as once the unit reboots it is still showing version 5.1. One thing to clarify is that I no longer have access to a DMM running 5.1 as my server is already upgraded to 5.3. The instructions referenced above indicate you need to upgrade the DMP firmware from DMM before you upgrade your DMM server. Obviously I can't do this. After doing a little more research I see others using MIBs from their web browsers to manipulate the DMPs directly bypassing the DMP's built in web browser interface. But I'm not sure how to proceed along these lines. Any other thoughts you might have would be most apprecited. ... View more

These 2 Digital Media Players are not registered to our DMM which is now running 5.3. I'm not following you with regards to reimaging using a full blown .iso file which sounds like you are talking about the DMM server. I'm trying to get these standalone DMPs to upgrade beyond 5.1 via their built in web browser which is not working as described above. ... View more