Natalie Ramirez
Level 1
Level 1
Member since ‎01-19-2012
‎08-18-2017

User Statistics

  • 90 Posts
  • 2 Solutions
  • 25 Helpful votes Given
  • 9 Helpful votes Received
Recent Badges
70 Discussion Posts
60 Replies
40 Discussion Posts
40 Replies
5 Discussion Posts
50 Discussion Posts
30 Replies
30 Discussion Posts
60 Discussion Posts
80 Discussion Posts

User Activity

I created an extended access list and allowed a single mac address in a conference room, so only the VoIP phone will have access with a deny any any at the end.  It did not work, so I removed all permits from the list and just have a single deny any ...
I have a 48 port 3750 POE switch, POE works fine on ports 6, 13, 16, 17, 19, 20, 30, 42, 44.  However, no other port will provide POE.  If I move a cable from port 6 and plug it into port 5, no errors on switch, no power to phone.  If I move it back ...
Router running IOS 15.2.4 M6c3900-universalk9-mz.SPA.152-4.M6.bin of 300+ phones 3 are registered to the SRST Cube router. #show voice register all Active registrations  : 3 Total SIP phones registered: 3 Total Registration StatisticsThe phones show ...
I have a Nortel phone system and we are evaluating CUCM.   We setup a SIP trunk from the CUCM to the Nortel which is connected to a PRI, and I can dial local calls, but when I call my Cell phone, my cell rings, but all I hear is silence on my Cisco p...
So on CUCM 9.1.2 I have a CTI route point for calls that come in on the main number 1000 and it goes to a Unity System Call handler. Then I have a customer service group that has a CTI route point that goes to the UCCX server for customer service ext...
Community Statistics
Member Since ‎01-19-2012 12:32 PM
Date Last Visited ‎08-18-2017 06:43 PM
Posts 90
Total Helpful Votes Received 9
Helpful Votes From
Helpful Votes Given To