habouzyad
Level 1
Level 1
Member since ‎02-06-2008
‎04-26-2024

User Statistics

  • 157 Posts
  • 0 Solutions
  • 10 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Hello all,I have in my data cneter the following :1- Two Switchs 45XX configured AS VSS.  2- We have a vlans configured and each vlans has its own SVI.3- ISR ROUTER with 2 interface G. We want connect this router to the both Swithcs using etherchanne...
Hello All,   I have the following server in my installation: 1- CUCM   for call control 2- TMS server 2- Two CMS  3- 20 endpoints (MX 300 series).   The Trunk and Conference Bridge are configured in CUCM to the Both CMS.  I have tested the both confe...
ello All, I have a CUCM installed in the headquarter and Telepresence Endpoint (MX300) on the remote site. The Endpoint are all registered on the CUCM. The WAN is an MPLS Cloud. For the some Routing Restriction, the remote site cannot call each other...
Hi all,   I have a codec SX20 registrerd to the CUCM 11.5. I have also configured the VCS-C and VCS-E.   I have configured the SIP trunk between the CUCM and VCS-C ( both are in the same vlan) Also I have confirued the Zone between VCS-C and VCS-E  (...
Hi all,I have deployed a new videoconference network, including the following items:1- CUCM 11.52- MX700 on HQ 3- MX300 on Remote sites4- Cisco TMS,TCS,VTS,Virual conductorFor the WAN connection, we used a private dedicated network used only by the V...
Community Statistics
Member Since ‎02-06-2008 08:23 AM
Date Last Visited ‎04-26-2024 02:32 AM
Posts 157
Helpful Votes Given To