Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
NFVIS recently has the ability to poll the sysname in version 4.11. I have configured the ENCS management port as follows.Here are configurations that we are using on the NFVISsnmp user XXX user-version 3 user-group XXX auth-protocol sha passphrase ...
What is the function of the VPC peer-link? Should be the composite of all VPC links that are dual homed between switches?In this diagram, is it necessary to have 8 x 10G links as shown above. The links conecting the 7Ks to the 5Ks are VPC links.
Hello;Can you please tell me if there is a workaround to apply an access-list to the NTP on the Nexu 5596, configuration similar to what we can do on the Nexus 7000 shown below.ntp access-group peer NTPFor some reason I cannot enter a similar command...
John;We have decided to single home the NEXUS 2Ks to each 5K. I beleive tha the maximum number of 2Ks per 5K is 12, but apparently in future versions the number is going to increase to 20 per 5K. I also have another question. We intend to connect ano...
I have a question regarding the first scenario which we are also implementing, but the 5Ks are also connectted to 7Ks. With VM NIC teaming configured on the servers, can be an active/active configuration on the server? I am confused because one of th...
Bryan;Have you experienced any aaa command authorization issues on the Nexus 5596s. We can authenticate to the TACACS server using TACACS+, but for some reason we cannot autocomplete commands, or even have any admin rights on the box. I know that the...
