Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
Hoping maybe somebody can shed some light on whether I'm missing something here, I've scoured online but can't seem to find a solution. I am receiving a reorder tone when trying to dial outbound and getting SIP/2.0 403 Forbidden-Source Endpo...
Riddle me this, I've been troubleshooting a voice quality issue with a client recently and I'm curious to get some feedback from the community. I've narrowed it down to packet loss between both the 2901 voice gateway (FXO for PSTN) and the phones (b...
Hi All,
I'm working on a config for a 2960x switch with the SDM routing template and I have a question regarding QoS. Essentially this 2960x is acting as a routed edge using only a default route to the core switch over an access port VLAN and /31 SV...
Edit: moved to Sourcefire category.
---
Hi All,
Wondering if somebody can lead me in the right direction here, I have a customer running Sourcefire 6.0 with the FireSIGHT MC and am having an issue with the IP to User mapping. Under Analysis > Users ...
Hi All,I'm dealing with a customer that has an end of life router with a pre-QoS IOS image. In an egress scenario, the router lies before their MPLS WAN router which is where any of the shaping happens. We are looking to implement QoS across the WA...
Hi Ayodeji/Mohammed,
Thanks for the responses, I have been trying a number of things so I may not have reverted back my config. I had tried SIP profiles to change the IP to the realm on the invite but that didn't work. The config is a work in prog...
Just to close off on this, TAC had pretty quickly dismissed the packet loss as something by design. He referenced a DDoS issue from a few years ago. It was still odd the phones responded 100% when from another vendors hardware even though those pin...
Great response thanks Joseph. I will do a bit of testing and respond inline. My main concern was whether the SVI would rewrite the L3 header and erase the DSCP as I'm planning to trust DSCP inbound on the access ports so any data applications that ...
