Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am curious for the best way to approach configuring 4 sites each connected to 2 fully meshed WAN networks (each net delivered as ethernet to the site's gateway router) with all site-to-site traffic being sent over a VPN/IPsec tunnel with EIGRP rout...
This seems like a big step backwards moving from CME to CUCM when blind transfer return is not even an option on CUCM. Please consider this feature.
(Agree that attendant console software, if a work around, is an issue with "rds/terminal server" en...
In CME, calls are returned after a blind transfer (transfer without waiting for a person to answer) to the Calling Party (person doing the transfer) if the Called Party (person you tried to transfer it to) does not answer. Is that not a feature in C...
I am looking to deploy a simple software based IP phone on Windows for basic phone testing in a pre-deployment (PT, CSS, Xlates, Dial-Plan, etc). Jabber seems to be a very intense setup and phone support on Android limited. I want to get IP Communi...
I do a lot of my work as a consultant remotely. So when I need to submit a TAC case on a piece of gear, it is handy to be able to do a "show version" to get the serial number of a device to open a TAC case for my customer. Sometimes the sites are c...
I know this is a very old posting, but I had the same problem and could not find an answer here or on the internet. The answer may be here under a different device or search term, but since I could not find it I dug into finding an answer. I am su...
I was looking at DMVPN a bit closer and I see a reference to a Phase 1, Phase 2, and Phase 3. The impression I am getting is that a "Phase 2" and "Phase 3" solution addresses this "Hub/Spoke" failure issue. Though I can't seem to find information c...
Thank you for your response!
I had looked at that initially, but doesn't that still require a "hub / spoke" type connection? In other words, I have 4 sites and in DMVPN, I would have to configure a "hub" site, correct? Let's call that site A. ...
Feels like a big step backwards on the CUCM from CME to not have this.
In looking on the net I read that maybe a 3rd party phone might be able to do this.... Does anyone know of a work around:
1) Attendant Console (software or hardware) that can do t...
