Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I could access KVM NAT IP in the past when downloading kvm.zip from UCSM 2.x (java based) but now with UCSM 4.x I cannot. When I browse using KVM direct WEB page, it failed when using NAT IP. Is there any workaround or solution to this? thank you
hi. I need to install 8300-1N1S-6T routers in dark site (data center). As per Cisco datasheet, this product only support DNA smart license. There is no internet, on-prem satellite server or proxy server in the DC environment. What is the solution for...
hi all,I have MDS 9250i switches running NX-OS 6.2(9) and I would like to upgrade to 8.2.2 during maintenance window. I read Cisco notes saying for NON-disruptive upgrade path is to go to 8.1.1b first then to 8.2.2. Since there are fabric A and B act...
hello all,
I read Cisco doco regarding power ignition on IR829. Once I enabled the power ignition, the off-timer starts kicking even though the router is still powered ON and it always had higher input voltage (12v) than the under-voltage value set (...
HI guys, I am having issue on prefixes received from external BGP neighbor. I can see the number of prefixes received but they are not shown in the BGP or IP routing table. My device is Cisco WS-6509-E
with IOS 122-33.SXI4a.bin and using WS-SUP720-3B...
thanks for your reply. I can confirm that NAT is fine (one to one static IP) which worked in the past when using UCSM2.x KVM JAVA. The old kvm script was downloaded from UCSM 2.x cluster ip https://x.x.x.x/kvm.zip. This URL is no longer valid for ne...
Hi, The UCS environment is in client network (for example IP 10.1.1.1 as blade KVM) and the management desktop sits outside where it can only reach the blade KVM IP by using NAT IP ie: 4.1.2.3. there is a NAT router/ firewall in between them.
I knew the standard console KVM but it does NOT work for NAT IP. In the past I can download KVM java script and run it to open KVM console using NAT IP.
