Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I am facing a Site to Site VPN configuration I am not used to doing it. A client asked us to establish an IPsec tunnel between our company and his headquarters and ask for a single IP NAT/PAT translation. I am used to configuring this kind of ...
Hello,I need your guidance because I need to deploy a postcall survey in a Contact Center using UCCX 7 scripting. I have limited knowledge in scripting and don't really know how, or if it is possible, to pass the information I need between the differ...
Hello, I am trying using an Easy VPN connection on Cisco 800 router from a remote Cisco VPN client on a laptop. I don't know if it's important but I get some error debuging isakmp and ipsec that I would like to know why they appear when connecting th...
Hello,I'm facing a problem in which I need to register an IP Phone against a CUCM 7.1 lab environment over a WAN link. I have forwarded TFTP udp port, SCCP tcp port and RTP range ports and IP phone tftp server pointing to public IP.I have confirmed t...
Hi,We have two independent locations,one of them has CUCM 6.1 and the other side, CME 7.1. Both can make video calls locally (with 7985s and CIPC).Is it possible to stablish point-to-point video calls between those two sides natively over PSTN/ISDN? ...
Hi again,
sorry but I couldn't read the doc till yesterday. I'm still not sure how to manage this. We are working with a Cisco 891 router to stablish this VPN and, once the phase 1 and phase 2 parameters are configured, we need to define the traffic...
Thank you both for your help, as I mentioned I am new in this area and need your advice. I will suggest IP network as you recommend, although I will also work on the document you offered because this is part of a solution that requires the use of ISD...
Ok, as you mentioned, the option that best meets our requierements is the third one. Now, we have configured RPs allocating them into common partitions (special_calls, international, national, lobby,...) and have CSS configured in the same way (CSS_i...
