Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm trying to acquire users information on a 6500 switch in VSS.I first tried in snmpv3 which did not work with the "context vlan- match prefix" trick, I then switched back to v2 but still not luck.I've got all the required MIBs ...Did anyone f...
Hello,I'm trying to setup LMS Prime 4.2.4 so that i retrieves existing IP SLA configuration on a device.It seems that either it does not work or I don't do it properly.Can someone tell me how to fetch IP SLA config/ statistics from a device into LMS ...
Hello,Does anyone know how to reduce the size of the snmp request sent from LMS to FWSM so that it is below or equal to 512 bytes ?I get a lot of these messages saying the SNMP request from LMS prime has been discarded because the size was too big (7...
Hello,Is it possible that a ASA fw self initiates a L2L VPN connection with ip sla or any other mechanism to a central firewall?This is in the case of a dynamic L2L VPN.I'm wondering since the VPN access-list would only be triggred by passing through...
Hello All,I'm dealing with this really odd behaviour.I have a bunch of routers connected as per the attached diagram.I am redistributing the 200.200.200.0/30 network into OSPF on R2Redistribution occurs as I can see the route installed in R1 routing ...
I managed to get the file import working so here are my findings :If you want to use a file to import IP SLA collector, keep in mind that LMS prime will create the ip sla config on the source device anyway but as it is done through SNMP a "show run" ...
Thanks for your answer.I was very happy until I realized the polling frequency was abitrary set to 1 hour for all the discovered collectors.Been trying to use a file to manually import collectors now for hours as it seems the only way to set the poll...
I've worked on this a bit more and realized that the polling frequency for the FWSM linterface utilization was 15 mins.I've lowered it to 5 mins and now it is working fine. Not sure exactly why...Thanks,Thibault
Hello Vinod,Thanks for answering. The FWSM is running version 4.1(1). But I see the enhencement is for asa 5500-x not FWM.I'm more looking into the way LMS works, when does it send packets larger then 512 bytes?Funny, here we're dealing with cisco to...
