About david de sousa

david de sousa · 06-15-2017

Hi all, I'm blocking on a point and it would be nice if someone could help me. Here is the problem : I have a standard infrastructure who consist of a core switch, a distributor, and an access switch. In this case, (for segmentation reason,) the a...

david de sousa · 08-27-2015

Hi guys, i'm troubleshooting multicast issue, so i used some cli Tools to debug. for now, i used mstat to see what about the path, and i found that there is 100% loss on a router. so i used the mrinfo command to see if there is a problem with Neighbo...

david de sousa · 02-04-2014

Hi guys,i'm working with Cisco Prime LMS 4.2.0, i have a problem to manage Nexus series, the switchs are well discovered but i can't fetch config, view ports, the modules not presents int the chassis are all in error. when i add th...

david de sousa · 12-05-2013

hi all,i'm facing an issue with quality of service (srr-queuing).i explain:i have a cisco ws-c3560X and i have different VLANs on it, i have one VLAN who support video encoders. i want to fix priority on the video VLAN and make sur...

david de sousa · 11-07-2013

hi all,i have an small issue with etherchannel, when i create a port-channel in a VSS c6506, the main Po goes down and create another one in parallel with the letter APort-channel132 unassigned YES unset down ...

david de sousa · 06-15-2017

Many Thank's Reza, i was missing the last part, it works now. Best Regards, David

david de sousa · 08-27-2015

HI,you mean with spt-threshold infinity ?cause, yes, we did it to avoid duplicate packet, but all my routers are in this state, but for others, i see the mrinfo with a metric =1. that's why i asked myself about this difference.the problem is : i did ...

david de sousa · 02-24-2014

Hi,thanks for the reply, i will start with one problem and open a new case for the others.my main problem is : when i add the nexus, it works, i can read snmp informations, fetch config and so on. but i have a lot of alarms about the card not plugged...

david de sousa · 12-05-2013

for more, just for you to know, if i disable the mls qos, everything works fine thanks

david de sousa · 12-05-2013

hi guys,thanks for replies, i have to test it but it seems it was a mismatch in flowcontrol. but i have to test it to be sure.if it's that, i'll come back to give you my feedback and mark as good answer.thanks for help,Regards

Member Since	‎09-21-2012 02:49 AM
Date Last Visited	‎11-21-2018 07:06 AM
Posts	28
Total Helpful Votes Received	5

User Statistics

User Activity

Communication between VRF and non-VRF

Mrinfo display multicast metric = 0

LMS 4.2 issue with Nexus 7k and Nexus 5k

QoS issue with video stream

Duplicate Etherchannel

Many Thank's Reza, i was

HI,you mean with spt

LMS 4.2 issue with Nexus 7k and Nexus 5k

QoS issue with video stream

Duplicate Etherchannel