Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two distribution switches and a single access layer switch. I want to configure the access switch to connect my APs. I would like to configure the access switch to connect to both distribution switches. I was working with vPC in another lab...
We have a pair of Nexus 7700s in in production, and I would like to learn more about Nexus (ie vPC, VDCs ect...). I wanted to create a lab VDC, but I want to make sure I don't mess up production. From my understanding, if I create a VDC and associa...
I am attempting to create an ISE lab at home. But I wanted to access the ISE interface from my production network, but at the same time segregate the ISE virtual machine and switches in there own environment. So I was thinking I could create anothe...
I'm looking to setup a pair of MDS 9148S switches in a high available configuration. I came across a post on the forums, where someone stated you won't trunk the switches, that you would simply create two separate fabrics. Servers and SAN(in our ca...
I'm having some isses setting up Cisco Prime Data Center Network Manager. I've installed it on my Server 2012 R2 server, and I've opened up Device Manager and it's prompting me for the Device Name and Community. Which device are they referring to, ...
Heya Leo!
I should of provided a few more specifics. So this is a lab, and the 3750s are acting separately and not in a stack. I am trying to mimic a real world scenario and lab to learn how traffic flows. In this case looking at getting wireless...
So I was able to configure an SVI on my switch, which is a 2960. At first I thought I had to upgrade the code to IOS version 12.2(55)SE to support the 'ip routing' command, but I think I'm okay.
Currently my test environment doesn't have an ASA in ...
I do not have a specified SVI for the new VLAN that ISE will reside in. So everything resides on the same switch, does that mean I could create a VLAN and specify an SVI and assign 6 ports to that VLAN, all on the same switch? That would work?
My ...
