Need to check if we upgrade ASA-5545-IPS-K9 to ASA5545-FP-UPG what would be the smartnet (CON-SNT/CON-SNTP) which will cover hardware and technical support for both ASA-5545-IPS-K9 appliance and firepower services. I came to know from presales team o...
Hi Team,
Do you know the router in cisco which should support 4X 10G Ethernet (RJ-45), I had gone thru the ASA 1001H-X series, unfortunately it only supports 10G SFP.
Your response is highly appreciated.
Saurabh
Hi,
I was working on conditional load balancing between our Primary link MPLS and backup link Point to Point. Assume that, we have 100 Mb of bandwidth with Primary MPLS and backup Point to Point is functional with 60 Mb bandwidth. Now let me elabo...
Team,
Do we have any alternate option to Prime the Aironet Universal APs apart from the cisco air provisioning software ?
I'd never succeed in make it to work with the Android Cisco Air provision. I've been struggling for weeks.
Also, I have not inte...
Hi Team,
I have some doubt about cisco 3850 feature license upgrade from LAN base to IP Base or IP services. Cisco now offering RTU license for most of the product; wherein we don’t need any license file to the switch anymore. We need to just purchas...
spoooster Thanks for your proactive response :
I think once the upgrade from the ASA5545-IPS-K9 to ASA5545-FPWR-K9 (with FirePOWER services) is done the ASA itself would be regarded as ASA5545-FPWR-K9 and as such it should be covered CON-SNT-A45FPK9...
Hi Leo,
Appreciate your early response, Could you please provide the PID of the module/slot/convertor by which I can use 10G Ethernet (RJ-45). I can’t see with ASR 1001HX or ASR 1002HX any RJ-45 based 10G option available.
Regards
Saurabh
Mohanak Hi,
Is this the only way to prime the Aironet universal AP ?
I already have mentioned about both the steps e.g. Manual and Automatic Priming whether we must need an internet connection and a GPS enabled smartphone.
Assume, I don't have any in...
I have gone through deeply with cisco documents and found we have an option MRA (mobile and remote access) through cisco express way (VCS)
So, we would be having a jabber application installed on phone, this jabber can register locally on CUCM and if...
Thanks Mr. Wayne of your interest in this discussion. According to you it’s a feasible solution.
If I talk about a little different scenario with this setup, like I have a mobile user (I-Phone or Android) who need to send his video camera feed with t...
