Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,we are experencing a MISSING_DEPENDENCY_VIBS_ERROR issue while performing a vmware esxi vsphere upgrade (6.5U2 => 7.0U3).Please take a look to the attached snapshotsThe esxi is running on a Cisco UCS C240 M4SBIOS rel: C240M4.4.1.2c.0.02022119...
Hi all,we are experiencing an issue with a cisco ISR4321 (running isr4400-universalk9.16.06.05.SPA.bin). The voice gateway is used to connect an ISDN PRI trunk (from provider) to a CUCM Cluster using a SIP trunk configuration.on inbound calls from IS...
Hi all,is there any update about this bug?We are running CMS 2.9, TMS 15.9 and CUCM 12.5.We've tried with partecipant template but it seems that DTMF are never sent.It seems to be in important limitation if you offer a direction service for events an...
Hi All,
we are experiencing a problem with a Cisco Touch 10 controller, paired with an SX 80 Codec.
The touch is plugged into Codec 2nd Ethernet port and powered through its own PoE supplier.
The device is correctly associated with the Codec but the ...
Hi All,
we are currently managing some mass-deployment of Cisco IP Telephone on different our customers who are all hosted on our Cisco Call Manager 11 cluster.
In order to speed up installation time we decided to set up TAPS on UCCX platform.
By the...
Hi guys,we were able to solve the issue just removing the "conflicting vibs" before upgrading to vpshere 7.x.In order to uninstall the vibs, you must enable ssh on the host and use the vsphere power shell commands.Here you are some usefull links:http...
Hi Nighin,thanks for your feedback.I confirm that a firewall is present but we check sip configuration and logs and we haven't seen any drop. After some test, I discovered that the "connection-reuse" command, under sip-ua was causing the issue.If sip...
Hi Jaime,thanks for your feedback.So rebuild the cluster starting from publisher and restoring the backup from drs will keep us safe, right?When we rebuild single subscriber, to we need to perform drs restore or just deploy them as secondary nodes (k...
Hi Martin, I'm still waiting for new hardware (UCS) in order to proceed with the migration.We should be ready in a couple of months.Anyway I'm still worried about certificates issues and in particular with Security By Default feature.As far as I know...
