Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Guys,
I have UCSC-C240-M4 crash running fw ver 2.0(3e) and the server is having PSU fault on CIMC but it clears within few minutes.
There is no amber light on the PSU1&2 physically. This was the only related bug i found
https://tools.cisco.com/bugs...
Guys,I am about to change my DNS IP on UCSM. I have 4 blades all hosting ESXi on it.- DNS changes are done on all 4 ESXi host with the new DNS IP.- Right now I need to make changes on the DNS IP on UCSM. Making changes to the DNS IP on UCSM will onl...
Guys,I am running RAID10 on UCS-C200-M2 and swapped one of the failed disk.Currently there is beep sound for more than 12 hours and I assume the new disk is rebuilding at the moment. On top of that, Physical drive status is currently on "unconfigured...
Guys,I am running RAID10 on UCS-C200-M2 and swapped one of the failed disk.Currently there is beep sound for more than 12 hours and I assume the new disk is rebuilding at the moment. On top of that, Physical drive status is currently on "unconfigured...
Hi Walter,
i have raised TAC case for this. Fix was to decommissioned the server so the UCSM cleared the information regarding this server and then recommissioned the server again.
Hi Kenny,
I am hitting similiar issue and have tried re-acknowledging the blade but issue didnt fix.
Any idea what could cause the issue?
Infrastructure and blade upgrade was done from ver - 2.2(c) to 2.2(7B)
