Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have noticed in our CUCM version 11.5.1.12900-21 that remote destinations stop working if the users does not answer several calls in a row. We have to go in and reset the destination by unchecking the line association and checking again. This w...
Back when Prime was starting out someone released a video where an admin logged into CUCM to setup a phone, than Unity connection, than presence (the standard on boarding process) while doing a split screen with Prime on the other side and a running...
Hi Everyone,
were going into a customer swaping out an old phone system with a new UC deployment.
Each Phone has an external DID and they were sold by sales ER to do additional alerting in an HA setup.
the customer is already sending updates to P...
Hi All,
I have a cisco UC lab at home which is starting to require public IP access (for video conferencing and expressway). Thus far i have solved the issue by putting a router at a datacenter, and making use a route-maps DMVPN Combo
This has al...
Hey all,
this will be the first v11 of install for QM and it's a from scratch install. Either way, i noticed if comming from 10.5 or starting new, you need to remove all QM from a server and install the v11 software from scratch (keeping the DB ins...
in my lab we go directly from Expressway Edge to Skype for business. in CMS, we route skype based domains (default rule makes everything skype and we configure specific cisco domains) out Expressway control to Expressway Edge.
Is that what your r...
I understand all of this but thanks for taking the time to response Chris. My question still stands... How can we present the stations external number mask to PSTN WITHOUT making individual ERL/ELIN
Thanks!
Thanks Chris. Was pretty much thinking that already however it's so much that people move, but names changes to DID's.
sounds / looks like we will have to create over 500 ELN's to match every single apartment to ensure the DID's is out pulsed to P...
This is on the Datacenter router.
ip nat inside source static tcp 10.0.1.2 80 <Public IP A> 80 extendable
ip nat inside source static 10.0.1.253 <Public IP B>
ip nat inside source static tcp 10.0.1.3 25 1 <Public IP C> 25 extendable
ip nat inside ...
