Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm hoping someone out there has seen this issue. I have been looking through bug lists, release notes but I can't find a shared SSL VPN license compatability matrix. We upgraded our ASA to 9.8.1 and we have other VPN concentrators (ASA's) sharin...
To Whom it May Concern,
I am encountering issue disabling lacp graceful-convergence with my Nexus 9372 and an ESX host. I'm able to setup the VPC and LAG group respectively. However, when I trip and disable lacp graceful-convergence the VPC on one...
To Whom it May Concern,I've configured the following:
!
tacacs-server key abcdefgtacacs-server host x.x.x.x timeout 5 tacacs-server host y.y.y.y timeout 5 aaa group server tacacs+ tacacs server x.x.x.x server y.y.y.y use-vrf management
source-inter...
To Whom it May Concern,I don't believe that you can swap out a SUP on the 6880-x-LE platform and as a result I'd suspect if the SUP fails you'd have to swap out the entire chassis. This said I was looking to see whether any of you may have tried thi...
TAC case is open by our Operations team.I did some more investigation and I believe we may have purchased a new pak file which allowed us to register licenses as an organization. It maybe an issue when we move to 9.8.x that these shared licensing mod...
There is default support for "local". You do not have to specifically identify it. This provided I agree with you to have the "admin" name defined in TACACS. Unfortunately, I do not have access to that server.
Hi Peter,
In regards to your response - "but this is a routed port, not a switch port". I've modified the policy to reflect the following:'
policy-map UPLINK_EGRESS class PRIORITY priority class NETWORK-CTRL bandwidth remaining percent 10 ...
Hi Steve,
Here is my policy. I don't have bandwidth associated with class-default.
policy-map type lan-queuing UPLINK_EGRESS class PRIORITY priority class NETWORK-CTRL bandwidth remaining percent 10 queue-buffers ratio 10 queue-limit d...
Hi Peter,I'm trying to do the same thing on the egress side - ie output. However, I'm running 15.1.2SY6 on a standalone 6880-x-le. I can't assign the service-policy to the interface.
I have platform qos queuing-only set but I'm literally grasping a...
